跳转到主内容

简介

Use this guide for help on removing the compartment door. This is necessary for other replacement guides such as the GPU and the hard drive.

配件

没有特定配件。

  1. Remove the battery by sliding the latch to the left and pulling the battery up. Remove the battery by sliding the latch to the left and pulling the battery up. Remove the battery by sliding the latch to the left and pulling the battery up.
    • Remove the battery by sliding the latch to the left and pulling the battery up.

  2. Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip. Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip.
    • Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip.

  3. Slide the compartment door towards the front of the computer and lift. Slide the compartment door towards the front of the computer and lift. Slide the compartment door towards the front of the computer and lift.
    • Slide the compartment door towards the front of the computer and lift.

结论

To reassemble your device, follow these instructions in reverse order.

Jake Alexander

于2018年01月22日注册

85 信誉积分

撰写一个指南

团队

Cal Poly, Team S11-G3, Banghart Winter 2018 Cal Poly, Team S11-G3, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S11G3

5 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 5

总计 250