跳转到主内容

你所需要的

  1. Alienware M15-P97F SSD Replacement, SSD: 步骤 1 中的图像 1,3 Alienware M15-P97F SSD Replacement, SSD: 步骤 1 中的图像 2,3 Alienware M15-P97F SSD Replacement, SSD: 步骤 1 中的图像 3,3
    • Shut down your computer by holding the power button for five seconds.

    • Disconnect the computer from all attachments and power sources.

  2. Alienware M15-P97F SSD Replacement: 步骤 2 中的图像 1,3 Alienware M15-P97F SSD Replacement: 步骤 2 中的图像 2,3 Alienware M15-P97F SSD Replacement: 步骤 2 中的图像 3,3
    • Use a Phillips #1 screwdriver to remove the six 2.4 mm screws from the bottom of the computer.

    • Also, remove the two screws located near the base of the power cord.

    • Loosen the three captive screws located closest to the touchpad.

    • Remove the back case.

  3. Alienware M15-P97F SSD Replacement: 步骤 3 中的图像 1,2 Alienware M15-P97F SSD Replacement: 步骤 3 中的图像 2,2
    • Whenever removing or installing parts. The battery should be disconnected.

    • Disconnect the battery cable from the system board.

  4. Alienware M15-P97F SSD Replacement: 步骤 4 中的图像 1,3 Alienware M15-P97F SSD Replacement: 步骤 4 中的图像 2,3 Alienware M15-P97F SSD Replacement: 步骤 4 中的图像 3,3
    • Use the Phillips #1 screwdriver to remove the single M2x25 screw that secures the solid-state drive.

    • Slide the SSD out from the socket to remove it from the system.

    • Always hold the SSD at the edges.

  5. Alienware M15-P97F SSD Replacement: 步骤 5 中的图像 1,3 Alienware M15-P97F SSD Replacement: 步骤 5 中的图像 2,3 Alienware M15-P97F SSD Replacement: 步骤 5 中的图像 3,3
    • Slide the M.2 2280 solid state drive into the M.2 card slot 2.

    • Slide the M.2 2280 thermal shield onto the frame.

    • Use the Phillips #1 screwdriver to replace the M2x25 screw and secure the SSD.

  6. Alienware M15-P97F SSD Replacement: 步骤 6 中的图像 1,3 Alienware M15-P97F SSD Replacement: 步骤 6 中的图像 2,3 Alienware M15-P97F SSD Replacement: 步骤 6 中的图像 3,3
    • To mount the solid state drive to primary drive go to the disk management setting. Right-click the unallocated drive and then left-click on the new simple volume.

    • You will get prompted with 5 screens:

    • Welcome to the New Simple Volume Wizards: Press “Next".

    • Specify Volume size: Choose the amount of memory you want to allocate (1000Mb = 1GB). Then click “Next”.

  7. Alienware M15-P97F SSD Replacement: 步骤 7 中的图像 1,3 Alienware M15-P97F SSD Replacement: 步骤 7 中的图像 2,3 Alienware M15-P97F SSD Replacement: 步骤 7 中的图像 3,3
    • Assign Driver Letter or Path: Choose “Mount in the following empty NFTS folder” by clicking browse.

    • Now choose what drive to mount to by clicking the drive, it will enable a drop-down list.

    • Find the location on the drive that you find suitable. Then make an empty folder or place it into an empty folder. Then press “OK” then “Next”.

    • Make sure that the “Format this volume with the following settings” option is selected with default settings then click “Next”.

    • To complete the new simple volume wizard, click finish.

结论

To reassemble your device, follow step 3 in reverse order until step 1.

Rachad Quintyne

于2021年07月03日注册

195 声望

撰写一个指南

团队

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 23

总计 281