跳转到主内容

Alienware M14xR2 Status-Light Board Replacement

你所需要的

  1. Alienware M14xR2 Status-Light Board Replacement, Battery: 步骤 1 中的图像 1,1
    • Turn the computer off.

    • Disconnect the charging cable from the computer.

    • Failure to unplug the charging cable could result in electric shock and serious injury.

    • Flip the computer upside down.

  2. Alienware M14xR2 Status-Light Board Replacement: 步骤 2 中的图像 1,3 Alienware M14xR2 Status-Light Board Replacement: 步骤 2 中的图像 2,3 Alienware M14xR2 Status-Light Board Replacement: 步骤 2 中的图像 3,3
    • Loosen the two 6.35 mm size 1 Phillips screws on the back cover.

    • The two screws are spring loaded and will not separate from the cover.

    • Slide the back cover towards you and then lift upwards to remove.

  3. Alienware M14xR2 Status-Light Board Replacement: 步骤 3 中的图像 1,1
    • Loosen the two 6.35 mm size 1 Philips screws attaching the battery to the laptop.

    • The two screws are clipped into the battery and will not detach.

  4. Alienware M14xR2 Status-Light Board Replacement: 步骤 4 中的图像 1,3 Alienware M14xR2 Status-Light Board Replacement: 步骤 4 中的图像 2,3 Alienware M14xR2 Status-Light Board Replacement: 步骤 4 中的图像 3,3
    • Pull up on the black tab on the battery to reveal the connection between the battery and laptop.

    • Pull up on the white connector to disconnect it from the laptop.

    • The battery is now free to remove from the laptop and can be set aside.

  5. Alienware M14xR2 Status-Light Board Replacement, Turning the Palm-Rest Assembly Over: 步骤 5 中的图像 1,1
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin.

    • Turn the palm-rest assembly over.

  6. Alienware M14xR2 Status-Light Board Replacement, Remove the Cable: 步骤 6 中的图像 1,1
    • Note the routing of status-light board cable and remove the cable from the routing guides.

    • NOTE: If the status-light board cable is under the speakers cable, remove the speakers cable first and then remove the status-light board cable.

  7. Alienware M14xR2 Status-Light Board Replacement, Turn the Palm-Rest Assembly Over: 步骤 7 中的图像 1,1
    • Turn the palm-rest assembly over.

  8. Alienware M14xR2 Status-Light Board Replacement, Remove the Screw: 步骤 8 中的图像 1,1
    • Remove the screw that secures the status-light board to the palm-rest assembly.

  9. Alienware M14xR2 Status-Light Board Replacement, Lifting the Status-Light Board: 步骤 9 中的图像 1,1
    • Carefully lift the status-light board and release its cable from the slot on the palm-rest assembly.

  10. Alienware M14xR2 Status-Light Board Replacement, Slide the Status-Light Board Cable: 步骤 10 中的图像 1,1
    • Slide the NEW status-light board cable through the slot in the palm-rest assembly.

  11. Alienware M14xR2 Status-Light Board Replacement, Align the Slot: 步骤 11 中的图像 1,1
    • Align the slot on the status-light board with the alignment post on the palm-rest assembly.

  12. Alienware M14xR2 Status-Light Board Replacement, Replace the Screw: 步骤 12 中的图像 1,1
    • Replace the screw that secures the status-light board to the palm-rest assembly.

  13. Alienware M14xR2 Status-Light Board Replacement, Turning the Palm-Rest Assembly Over: 步骤 13 中的图像 1,1
    • Turn the palm-rest assembly over.

  14. Alienware M14xR2 Status-Light Board Replacement, Routing the Status-Light Board Cable: 步骤 14 中的图像 1,1
    • Route the status-light board cable through the routing guides on the palm-rest assembly.

结论

To reassemble your device, follow these instructions in reverse order.

Terrence15

于12/18/17注册

79,034 声望

创作了441篇指南

团队

RampUP America, Inc. RampUP America, Inc. 的会员

Community

42 名成员

创作了1,985篇指南

一条评论

Völliges Durcheinander und unvollständig

Robert Fleischhauer - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 4

总计 656