跳转到主内容

简介

Use this guide to replace the rear facing camera on your Alcatel One Touch Fierce.

  1. Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone. Lift the rear case by the corner nearest the divot and remove it from the phone.
    • Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone.

    • Lift the rear case by the corner nearest the divot and remove it from the phone.

  2. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  3. Remove the 11 Phillips #000 screws. The midframe should lift free. The midframe should lift free.
    • Remove the 11 Phillips #000 screws.

    • The midframe should lift free.

  4. Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera. Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera.
    • Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Cody Stouffer

于2014年10月30日注册

410 信誉积分

创作了2篇指南

团队

UMass Dartmouth, Team 5-5, Vijaybhaskar Fall 2014 UMass Dartmouth, Team 5-5, Vijaybhaskar Fall 2014 的会员

UMASSD-VIJAYBHASKAR-F14S5G5

3 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 2,175