修复你的物品 社区 商店
加入维修社区 - 创建账户

Air Filter Removal

仅作为前提条件
本指南仅提供前提条件！本指南是另一个程序的一部分，不能单独使用。

简介

This is a pre-requisite only guide for removing the air filter and air box in order to complete other repairs.

你所需要的

  1. Air Filter Removal, Remove the Air Filter Cover: 步骤 1 中的图像 1，1

    • Use your fingers to unscrew and remove the wing nut securing the air filter cover to the air filter elbow.

    翻译

  2. Air Filter Removal: 步骤 2 中的图像 1，2 Air Filter Removal: 步骤 2 中的图像 2，2

    • Lift up and remove the air filter cover to reveal the air filter.

    • The air filter cover will still be attached to the tiller by a flexible hose. You can push the cover to the side while you continue to work on the tiller, or follow the next two steps to completely remove the cover.

    翻译

  3. Air Filter Removal, Detach the Air Filter Cover: 步骤 3 中的图像 1，2 Air Filter Removal, Detach the Air Filter Cover: 步骤 3 中的图像 2，2

    • The next two steps are optional, but they will make it easier to work on the tiller from here on out.

    • Squeeze the metal clip on the inside of the air filter cover and remove it.

    翻译

  4. Air Filter Removal: 步骤 4 中的图像 1，2 Air Filter Removal: 步骤 4 中的图像 2，2

    • Hold onto the air filter hose and pull on the air filter cover to remove it.

    翻译

  6. Air Filter Removal, Remove the Air Filter: 步骤 5 中的图像 1，1

    • Use your fingers to unscrew and remove the wing nut securing the air filter to the air filter elbow.

    翻译

  7. Air Filter Removal: 步骤 6 中的图像 1，2 Air Filter Removal: 步骤 6 中的图像 2，2

    • Wear gloves or use a rag during this step, as the air filter is coated with oil.

    • Lift the air filter straight up off the elbow, making sure it clears the threaded rod.

    翻译

  8. Air Filter Removal, Remove the Air Filter Elbow: 步骤 7 中的图像 1，1

    • Use a 10 mm socket and socket wrench to remove the 25.5 mm-long bolt securing the air filter elbow to the tiller.

    翻译

  9. Air Filter Removal: 步骤 8 中的图像 1，1

    • Use a 10 mm socket and socket wrench to remove the two nuts securing the air filter elbow to the carburetor's threaded rods.

    翻译

  10. Air Filter Removal: 步骤 9 中的图像 1，3 Air Filter Removal: 步骤 9 中的图像 2，3 Air Filter Removal: 步骤 9 中的图像 3，3

    • Use a pair of snap ring pliers to loosen the spring hose clamp on the breather tube, pulling it out 2-3 cm so it's not clamping onto the end of the tube.

    翻译

  11. Air Filter Removal: 步骤 10 中的图像 1，2 Air Filter Removal: 步骤 10 中的图像 2，2

    • Pull the air filter elbow straight off, making sure it clears the carburetor's threaded rods.

    • As you remove the elbow, you may need to use your other hand to remove the breather tube from the engine's valve cover.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Craig Lloyd

于02/10/16注册

41,479 声望

创作了82篇指南

徽章: 41

+ 38更多徽章

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 8

总计 31