跳转到主内容

Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement

你所需要的

  1. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement, Lens Assembly: 步骤 1 中的图像 1,3 Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement, Lens Assembly: 步骤 1 中的图像 2,3 Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement, Lens Assembly: 步骤 1 中的图像 3,3
    • Remove the battery cover.

    • Remove the batteries.

  2. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 2 中的图像 1,1
    • Unscrew the three 4mm screws from the battery side of the device. Use a Phillips screw driver.

  3. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 3 中的图像 1,1
    • Remove the four screws from the back side.

  4. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 4 中的图像 1,2 Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 4 中的图像 2,2
    • Remove the sticky black dots.

    • Remove the hidden screw.

  5. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 5 中的图像 1,2 Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 5 中的图像 2,2
    • Remove the two screws from the top side of the device.

    • Remove the two screws from the bottom side of the device.

  6. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 6 中的图像 1,1
    • Remove the rear cover.

    • Be careful not to lose the spring inside.

  7. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 7 中的图像 1,1
    • Pull back the front cover so that you can dislodge the side cover.

  8. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 8 中的图像 1,1
    • Unfold the device and be careful not to tear the black and red power supply wires.

  9. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 9 中的图像 1,1
    • Remove the four screws from the motherboard.

  10. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 10 中的图像 1,1
    • Take out the motherboard while disconnecting the flip screen's cable from underneath.

  11. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: 步骤 11 中的图像 1,1
    • Replace the Lens Assembly board.

    • Be careful not to damage any of the pins. Pull the board linearly.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

USF Tampa, Team 6-4, Brown Winter 2015 USF Tampa, Team 6-4, Brown Winter 2015 的会员

USFT-BROWN-W15S6G4

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 114