修复你的物品 社区 商店

Aiptek Pocket DVII 1.3M LCD Display Screen Replacement

你所需要的

  1. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: 步骤 1 中的图像 1，3 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: 步骤 1 中的图像 2，3 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: 步骤 1 中的图像 3，3

    • Remove the battery cover.

    • Remove the batteries.

    编辑

  2. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 2 中的图像 1，2 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 2 中的图像 2，2

    • Remove the sticky black dots.

    • Remove the three black 4mm screws from the flip screen. Use a Phillips head screw driver.

    编辑

  3. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 3 中的图像 1，1

    • Using an opening tool, separate the cover from the screen.

    • The cover won't completely come off. This will happen in the next step.

    • Don't be afraid to use a little more force.

    编辑

  4. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 4 中的图像 1，1

    • Using an opening tool remove the outside cover of the flip screen.

    • Move the cover towards the lens and then away from the screen.

    编辑

  6. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 5 中的图像 1，2 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 5 中的图像 2，2

    • With the cover off, push the brown locking mechanism up, so the picture cable can be remove.

    • You only need to unplug the bottom cable in the picture.

    编辑

  7. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 6 中的图像 1，1

    • Remove the two black screws from the circuit board.

    编辑

  8. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 7 中的图像 1，1

    • With the opening tool, pop up the screen assembly.

    • The screen is glued to the black cover. Use more force if needed.

    编辑

  9. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 8 中的图像 1，1

    • As in step 5, push up the brown locking mechanism of the remaining cable.

    • Unplug the picture cable.

    编辑

  10. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 9 中的图像 1，1

    • Turn the circuit board over and with a soldering gun remove the two wires on each end.

    • Use a screwdriver to pull the loosened wire away.

    编辑

  11. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 步骤 10 中的图像 1，1

    • With the wires no longer holding the circuit board and screen together, remove and replace the broken screen.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Gyozo Aba Hivatal

于01/21/15注册

561 声望

创作了5篇指南

徽章: 14

+ 11更多徽章

团队

USF Tampa, Team 6-4, Brown Winter 2015 USF Tampa, Team 6-4, Brown Winter 2015 的会员

USFT-BROWN-W15S6G4

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 343