菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

Afterglow Wireless PS3 Controller Joystick Replacement

撰写者： Aj Coello (和另外2个贡献者)
  • 评论： 0
  • 收藏 1
  • 完成 1

难度

中等

步骤

5

所需时间

8分钟

节

2

标志

1

Featured Student Guide

特色学生指南

该指南是我们优秀学生的辛勤劳动的成果，iFixit的工作人员认为这个很酷。

简介

In order to replace the joysticks for the Afterglow Wireless PS3 Controller the back plate must be removed and the joystick boards must be unscrewed.

工具

购买这些工具

配件

没有特定配件。

  1. Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller. Lift up and remove the controller back plate.

    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

    编辑

  2. Carefully remove the battery by lifting it straight up from its place.

    • Carefully remove the battery by lifting it straight up from its place.

    • Keep in mind that the red and black battery wires are attached to the motherboard. Handle these with care.

    编辑

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

  4. Unscrew the four 9mm Phillips #0 screws that are attached to both joy stick control mini-motherboards. There are two screws for each mini-motherboard.

    • Unscrew the four 9mm Phillips #0 screws that are attached to both joy stick control mini-motherboards. There are two screws for each mini-motherboard.

    编辑

  5. Jiggle both joy stick control mini-motherboards out of their holding place. Jiggle both joy stick control mini-motherboards out of their holding place.

    • Jiggle both joy stick control mini-motherboards out of their holding place.

    编辑

  6. Firmly grip the joystick housing with your forefingers by the yellow squares. Use your other hand to get a grip on the black plastic joystick and pull directly away from the housing. This will take some force to remove.

    • Firmly grip the joystick housing with your forefingers by the yellow squares.

    • Use your other hand to get a grip on the black plastic joystick and pull directly away from the housing.

    • This will take some force to remove.

    • Try not to use the motherboard for leverage because it is delicate.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Aj Coello

于2017年02月17日注册

633 信誉积分

创作了6篇指南

徽章: 12

+ 9更多徽章

团队

USF Tampa, Team S19-G5, Hoffman Spring 2017 USF Tampa, Team S19-G5, Hoffman Spring 2017 的会员

USFT-HOFFMAN-S17S19G5

4 名成员

创作了8篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 4

过去的30天： 14

总计 707