跳转到主内容

Afridev Tank Replacement

你所需要的

  1. Afridev Tank Replacement, Head: 步骤 1 中的图像 1,2 Afridev Tank Replacement, Head: 步骤 1 中的图像 2,2
    • Assemble the required tools, including the Afridev tool and crescent wrenches.

  2. Afridev Tank Replacement: 步骤 2 中的图像 1,3 Afridev Tank Replacement: 步骤 2 中的图像 2,3 Afridev Tank Replacement: 步骤 2 中的图像 3,3
    • Perform a water test on the pump, by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

  3. Afridev Tank Replacement: 步骤 3 中的图像 1,2 Afridev Tank Replacement: 步骤 3 中的图像 2,2
    • Loosen the bolt on front of the face plate with the Afridev tool.

    • Remove the plate from the pump by lifting it straight up.

  4. Afridev Tank Replacement, Axle and Handle: 步骤 4 中的图像 1,3 Afridev Tank Replacement, Axle and Handle: 步骤 4 中的图像 2,3 Afridev Tank Replacement, Axle and Handle: 步骤 4 中的图像 3,3
    • Insert the T-handle into the top cylinder of the exposed pump rod.

  5. Afridev Tank Replacement: 步骤 5 中的图像 1,2 Afridev Tank Replacement: 步骤 5 中的图像 2,2
    • Loosen the 2 bolts on either side of handle.

    • It is not necessary to remove the bolt at this time; however, take caution to not let the bolt fall out of the handle.

  6. Afridev Tank Replacement: 步骤 6 中的图像 1,3 Afridev Tank Replacement: 步骤 6 中的图像 2,3 Afridev Tank Replacement: 步骤 6 中的图像 3,3
    • Loosen the 2 bolts on either side of the head to remove the handle from the pump rod.

    • It is not necessary to remove the bolt at this time; however, take caution to not let the bolt fall out of the handle.

  7. Afridev Tank Replacement: 步骤 7 中的图像 1,2 Afridev Tank Replacement: 步骤 7 中的图像 2,2
    • Lift the handle to a horizontal position.

  8. Afridev Tank Replacement: 步骤 8 中的图像 1,3 Afridev Tank Replacement: 步骤 8 中的图像 2,3 Afridev Tank Replacement: 步骤 8 中的图像 3,3
    • While one person lifts up on the T-handle, remove the bolt and connection pieces.

  9. Afridev Tank Replacement: 步骤 9 中的图像 1,3 Afridev Tank Replacement: 步骤 9 中的图像 2,3 Afridev Tank Replacement: 步骤 9 中的图像 3,3
    • Remove the bolt and connection pieces from the handle.

    • Set the bolt pieces in a sanitary place, such as a bucket, to prevent contamination.

  10. Afridev Tank Replacement: 步骤 10 中的图像 1,2 Afridev Tank Replacement: 步骤 10 中的图像 2,2
    • Remove the handle from the pump.

    • Be sure to set the handle in a sanitary place to prevent contamination.

  11. Afridev Tank Replacement, Pump Rod: 步骤 11 中的图像 1,2 Afridev Tank Replacement, Pump Rod: 步骤 11 中的图像 2,2
    • Grab firmly on the T-handle and lift the pump rod straight up.

    • Expose the first connection of the pump rod, and support the portion below the connection.

  12. Afridev Tank Replacement: 步骤 12 中的图像 1,2 Afridev Tank Replacement: 步骤 12 中的图像 2,2
    • While holding the pump rod below the first connection tightly, lower the first portion of the rod to a horizontal position.

  13. Afridev Tank Replacement: 步骤 13 中的图像 1,3 Afridev Tank Replacement: 步骤 13 中的图像 2,3 Afridev Tank Replacement: 步骤 13 中的图像 3,3
    • Unhook the first connection by pushing it out and down, then pulling it away from the rest of the rod.

  14. Afridev Tank Replacement: 步骤 14 中的图像 1,3 Afridev Tank Replacement: 步骤 14 中的图像 2,3 Afridev Tank Replacement: 步骤 14 中的图像 3,3
    • Repeat steps 11-13 for the remaining sections of pump rod.

    • Be sure to set the pump rod segments above the ground to avoid contamination.

  15. Afridev Tank Replacement, Tank: 步骤 15 中的图像 1,2 Afridev Tank Replacement, Tank: 步骤 15 中的图像 2,2
    • Place one wrench on the top side of the top base of the tank spout.

    • Place another wrench on the underside of the bolt in order to get more leverage.

    • Pull the top wrench to the right, and the bottom wrench to the left.

  16. Afridev Tank Replacement: 步骤 16 中的图像 1,3 Afridev Tank Replacement: 步骤 16 中的图像 2,3 Afridev Tank Replacement: 步骤 16 中的图像 3,3
    • Remove the loosened bolt from the pump.

    • Repeat this procedure for the 3 remaining bolts.

  17. Afridev Tank Replacement: 步骤 17 中的图像 1,2 Afridev Tank Replacement: 步骤 17 中的图像 2,2
    • Lift the tank straight up to remove it from the pump.

    • Be sure to place the tank in a sanitary place to prevent contamination.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Jake Devincenzi

于04/18/11注册

117,225 声望

创作了57篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 5

总计 304