Aerogarden Air Pump Replacement - iFixit 维修指南

简介

Want to replace a Aerogarden Air Pump?

视频概述

步骤 1 Aerogarden Air Pump

Aerogarden Air Pump Replacement, Aerogarden Air Pump: 步骤 1 中的图像 1，2

Aerogarden Air Pump Replacement, Aerogarden Air Pump: 步骤 1 中的图像 2，2

Remove the water and seed pod container and set it aside.

步骤 2

Aerogarden Air Pump Replacement: 步骤 2 中的图像 1，2

Aerogarden Air Pump Replacement: 步骤 2 中的图像 2，2

Peel back the footpads at the bottom.
Unscrew the eight screws on the bottom to remove the base

步骤 3

Aerogarden Air Pump Replacement: 步骤 3 中的图像 1，2

Aerogarden Air Pump Replacement: 步骤 3 中的图像 2，2

Disconnect the wires for the lights so the base can be fully opened.

步骤 4

Aerogarden Air Pump Replacement: 步骤 4 中的图像 1，2

Aerogarden Air Pump Replacement: 步骤 4 中的图像 2，2

Remove the four screws holding the pump down

步骤 5

Aerogarden Air Pump Replacement: 步骤 5 中的图像 1，2

Aerogarden Air Pump Replacement: 步骤 5 中的图像 2，2

Cut the wires as close to the pump as possible, to preserve their length. The wire connections are covered with glue
Strip the plastic from about 1/8 inch of the wire ends.
On the circuit board, note which wire is positive, and which wire is negative.

步骤 6

Aerogarden Air Pump Replacement: 步骤 6 中的图像 1，2

Aerogarden Air Pump Replacement: 步骤 6 中的图像 2，2

Connect the wires to the new pump and solder them in or affix them with heat shrink tubing for wires. Well, the solder should be covered with the heat shrink tubing, as well, since it is a potentially wet environment.

步骤 7

Aerogarden Air Pump Replacement: 步骤 7 中的图像 1，3

Aerogarden Air Pump Replacement: 步骤 7 中的图像 2，3

Aerogarden Air Pump Replacement: 步骤 7 中的图像 3，3

Assemble in reverse order.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Jameslimon

于03/20/24注册

145 声望

撰写一个指南

团队

CSU Los Angeles, Team 1-59, Harris Spring 2024 CSU Los Angeles, Team 1-59, Harris Spring 2024 的会员

CSULA-HARRIS-S24S1G59

2 名成员

创作了1篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 10

过去 30 天： 13

总计 40