跳转到主内容

简介

The motherboard holds important electronic components and directs signals from the computer to the monitor screen.

  1. Place the monitor screen face down. Firmly hold the base of the stand with one hand and the bottom of the monitor with the other hand.
    • Place the monitor screen face down.

    • Firmly hold the base of the stand with one hand and the bottom of the monitor with the other hand.

    • Pull the stand away from the monitor.

  2. Use the plastic opening tool to pry the back panel from the front panel. Start at one point of the crease and pry along the edge of the entire monitor for the best results. Start at one point of the crease and pry along the edge of the entire monitor for the best results.
    • Use the plastic opening tool to pry the back panel from the front panel.

    • Start at one point of the crease and pry along the edge of the entire monitor for the best results.

  3. Gently lift back panel away from the monitor.
    • Gently lift back panel away from the monitor.

  4. Be sure to keep track of where you place your screws. A magnetic mat is great for keeping your screws in one spot. Unscrew the four 7.5 mm Phillips #2 screws connecting the motherboard to the metal casing.
    • Be sure to keep track of where you place your screws. A magnetic mat is great for keeping your screws in one spot.

    • Unscrew the four 7.5 mm Phillips #2 screws connecting the motherboard to the metal casing.

  5. Remove the four 10 mm hex screws. Remove the four 10 mm hex screws.
    • Remove the four 10 mm hex screws.

  6. Gently lift the motherboard casing from the monitor.
    • Gently lift the motherboard casing from the monitor.

  7. The following steps give instructions for detaching the three connectors shown in the picture.
    • The following steps give instructions for detaching the three connectors shown in the picture.

  8. Lift the black seal to release the small ribbon connector (the No Fuss Ribbon Cable connector) from the motherboard.
    • Lift the black seal to release the small ribbon connector (the No Fuss Ribbon Cable connector) from the motherboard.

    • The connector will be released from the motherboard immediately.

  9. Lift the black seal to release the large ribbon connector (the ZIF connector).
    • Lift the black seal to release the large ribbon connector (the ZIF connector).

    • The connector will be released from the motherboard immediately.

  10. Pull the bundled cable connector gently away from motherboard.
    • Pull the bundled cable connector gently away from motherboard.

  11. Gently lift the motherboard to remove  it from the monitor.
    • Gently lift the motherboard to remove it from the monitor.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Jeffrey Kong

于2014年09月22日注册

707 信誉积分

创作了5篇指南

团队

Cal Poly, Team 12-3, Forte Fall 2014 Cal Poly, Team 12-3, Forte Fall 2014 的会员

CPSU-FORTE-F14S12G3

5 名成员

创作了5篇指南

como saber si es la board o las lamparas q trae la pantalla?

y cual es la forma de reparar las lamparas

Doc acvdo - 回复

What is the specific name of that dc-in power jack?I’ m trying to replace that thing with a new one,the current one is already faulty.Can u recommend me where to find that part?Thanks!

Oreo - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 7

过去的30天: 42

总计 3,640