跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

你所需要的

  1. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 1 中的图像 1,2 : 步骤 1 中的图像 2,2
    • Flip the laptop upside down so that the bottom is facing up.

  2. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 2 中的图像 1,3 : 步骤 2 中的图像 2,3 : 步骤 2 中的图像 3,3
    • Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering.

    • Remove the RAM tray cover by prying it up with a plastic opening tool.

  3. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 3 中的图像 1,2 : 步骤 3 中的图像 2,2
    • Remove the screw on the Hard Drive tray with a Phillips #0 screwdriver.

    • Lift up the tray covering using a plastic opening tool.

  4. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 4 中的图像 1,1
    • Use the Phillips #0 screwdriver to remove the fourteen 9mm screws holding the back cover in place.

    • Remove the hard drive (if applicable) from the slot prior to removing the back cover.

    • This device didn't have a hard drive so your device may look different.

  5. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 5 中的图像 1,3 : 步骤 5 中的图像 2,3 : 步骤 5 中的图像 3,3
    • Carefully remove the back shell from the device by prying at the creases with a spudger around all the edges.

    • Do not forcefully try to separate the shell as you may cause harm to the shell.

  6. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 6 中的图像 1,1
    • Lift the back cover off once all the clips have been disengaged.

  7. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 7 中的图像 1,3 : 步骤 7 中的图像 2,3 : 步骤 7 中的图像 3,3
    • Using your fingers, disconnect the white and black cables connected to the left side of the Wi-fi card.

  8. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 8 中的图像 1,3 : 步骤 8 中的图像 2,3 : 步骤 8 中的图像 3,3
    • Remove the screw holding down the Wi-Fi card with a Phillips #0 screwdriver.

  9. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 9 中的图像 1,2 : 步骤 9 中的图像 2,2
    • Slide the Wi-Fi card out from its port.

终点

另外一个人完成了本指南。

一条评论

My hard drive got disconnected and I can't locate where is the place to connect it

manueltopete59 - 回复

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 24

过去 30 天: 99

总计 5,966