跳转到主内容

简介

This guide will walk you through the process of replacing a dying or dead Wi-fi card in an Acer Nitro 5 AN515-53-55G9. If you have connectivity issues with your computer, they may be alleviated by installing a new Wi-fi card.

  1. Flip the laptop upside down so that the bottom is facing up. Flip the laptop upside down so that the bottom is facing up.
    • Flip the laptop upside down so that the bottom is facing up.

  2. Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering. Remove the RAM tray cover by prying it up with a plastic opening tool. Remove the RAM tray cover by prying it up with a plastic opening tool.
    • Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering.

    • Remove the RAM tray cover by prying it up with a plastic opening tool.

  3. Remove the screw on the Hard Drive tray with a Phillips #0 screwdriver. Lift up the tray covering using a plastic opening tool.
    • Remove the screw on the Hard Drive tray with a Phillips #0 screwdriver.

    • Lift up the tray covering using a plastic opening tool.

  4. Use the Phillips #0 screwdriver to remove the fourteen 9mm screws holding the back cover in place.
    • Use the Phillips #0 screwdriver to remove the fourteen 9mm screws holding the back cover in place.

  5. Carefully remove the back shell from the device by prying at the creases with a spudger around all the edges. Do not forcefully try to separate the shell as you may cause harm to the shell. Do not forcefully try to separate the shell as you may cause harm to the shell.
    • Carefully remove the back shell from the device by prying at the creases with a spudger around all the edges.

    • Do not forcefully try to separate the shell as you may cause harm to the shell.

  6. Lift the back cover off once all the clips have been disengaged.
    • Lift the back cover off once all the clips have been disengaged.

  7. Using your fingers, disconnect the white and black cables connected to the left side of the Wi-fi card. Using your fingers, disconnect the white and black cables connected to the left side of the Wi-fi card. Using your fingers, disconnect the white and black cables connected to the left side of the Wi-fi card.
    • Using your fingers, disconnect the white and black cables connected to the left side of the Wi-fi card.

  8. Remove the screw holding down the Wi-Fi card with a Phillips #0 screwdriver. Remove the screw holding down the Wi-Fi card with a Phillips #0 screwdriver. Remove the screw holding down the Wi-Fi card with a Phillips #0 screwdriver.
    • Remove the screw holding down the Wi-Fi card with a Phillips #0 screwdriver.

  9. Slide the Wi-Fi card out from its port. Slide the Wi-Fi card out from its port.
    • Slide the Wi-Fi card out from its port.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 26

过去的30天: 118

总计 892