修复你的物品 社区 商店

Acer Iconia Tab A200 Microphone Replacement

简介

The microphone is used to recognize sound input for the device.

你所需要的

  1. Acer Iconia Tab A200 Microphone Replacement, Battery: 步骤 1 中的图像 1，2 Acer Iconia Tab A200 Microphone Replacement, Battery: 步骤 1 中的图像 2，2

    • With the plastic opening tool pry open the grey plastic siding on both sides of the tablet.

    编辑

  2. Acer Iconia Tab A200 Microphone Replacement: 步骤 2 中的图像 1，2 Acer Iconia Tab A200 Microphone Replacement: 步骤 2 中的图像 2，2

    • Using a Phillips #00 screwdriver remove the 4.0 mm screws on the sides of the tablet.

    • There are two screws on each side of the tablet that need to be removed before the back casing can be removed.

    编辑

  3. Acer Iconia Tab A200 Microphone Replacement: 步骤 3 中的图像 1，2 Acer Iconia Tab A200 Microphone Replacement: 步骤 3 中的图像 2，2

    • Once the 4 screws have been removed use the plastic opening tool to pry open the device on the side of the device.

    • Be careful prying on the sides where you removed the screw as the plastic casing is not very strong and may break.

    • After prying open the case with the plastic opening tool carefully remove the case from the device and place the device face down on its screen.

    编辑

  5. Acer Iconia Tab A200 Microphone Replacement: 步骤 4 中的图像 1，2 Acer Iconia Tab A200 Microphone Replacement: 步骤 4 中的图像 2，2

    • Using a Phillips #00 screwdriver remove the 4.0 mm screws holding the battery in place.

    编辑

  6. Acer Iconia Tab A200 Microphone Replacement: 步骤 5 中的图像 1，2 Acer Iconia Tab A200 Microphone Replacement: 步骤 5 中的图像 2，2

    • Lift the battery out of the device, and disconnect the cable attached to the motherboard by pulling it out to the side not lifting it up.

    编辑

  7. Acer Iconia Tab A200 Microphone Replacement, Microphone: 步骤 6 中的图像 1，2 Acer Iconia Tab A200 Microphone Replacement, Microphone: 步骤 6 中的图像 2，2

    • Lift up on the microphone cable to lift the microphone component away from the case.

    编辑

  8. Acer Iconia Tab A200 Microphone Replacement: 步骤 7 中的图像 1，1

    • Once the microphone has been lifted away from the case, disconnect the microphone cable from the motherboard by pulling the cable out horizontally. Do not lift up to remove.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Jaimie Payne

于03/06/16注册

477 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

UMass Dartmouth, Team 5-5, Landers Spring 2016 UMass Dartmouth, Team 5-5, Landers Spring 2016 的会员

UMASSD-LANDERS-S16S5G5

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 153