简介
The DC power jack component is used to charge the Acer tablet. The component is approximately 8 inches in length and connects to the motherboard to supply power to the device.
你所需要的
-
-
With the plastic opening tool pry open the grey plastic siding on both sides of the tablet.
-
-
-
-
Using the plastic opening tool gently lift up the charging component out of its slot in the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
3等其他人完成本指南。
2条评论
Probably no need to REPLACE the jack. Just push the little indented tabs in a fraction of a millimeter and it will make good contact again. I just did this with mine and it works perfectly now after having been a royal PITA for over a year.