跳转到主内容

简介

The speaker is an essential part of the Acer Iconia One 7 enabling it to give auditory notifications and playback to the users. The speaker appears sturdy but it is in fact a delicate part requiring careful attention to detail and a light touch during replacement.

  1. Begin at any side of the tablet.
    • Begin at any side of the tablet.

    • With a plastic opening tool, begin taking apart the back cover from the tablet by working along the edges.

    • Prying the lid open can be difficult; use caution in order to safely remove.

    • Turn off device before this step.

  2. Using a plastic opening tool, separate the back cover from the main device.
    • Using a plastic opening tool, separate the back cover from the main device.

    • Open each side continuously to ensure all sides have been separated.

  3. Turn the tablet over to locate the speaker.
    • Turn the tablet over to locate the speaker.

    • Besides the parts that are mentioned in the instruction, try not to agitate other fragile components inside the device.

    • The speaker is on the bottom of the inside.

  4. Peel back tape. Using tweezers, detach connection from motherboard.
    • Peel back tape.

    • Using tweezers, detach connection from motherboard.

  5. Unscrew screws with a JIS screwdriver with a #00 screw bit. Dislodge the speaker unit. Take care not to displace any other bits in the device.
    • Unscrew screws with a JIS screwdriver with a #00 screw bit.

    • Dislodge the speaker unit.

    • Take care not to displace any other bits in the device.

结论

To reassemble your device, follow these instructions in reverse order.

Michael

于2015年09月03日注册

516 信誉积分

创作了4篇指南

团队

USF Tampa, Team 8-5, Eyestone Fall 2015 USF Tampa, Team 8-5, Eyestone Fall 2015 的会员

USFT-EYESTONE-F15S8G5

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 322