简介

The keyboard may be easily replaced if a key or keys no longer works. It is accessible without removing the back cover of the computer.

  1. Use the pointed end of the spudger to slide the battery lock until the battery pops loose.
    • Use the pointed end of the spudger to slide the battery lock until the battery pops loose.

    添加评论

  2. Slide the battery out of the battery slot.
    • Slide the battery out of the battery slot.

    添加评论

    • Remove the two 6mm PH1 screws from the bottom of the laptop.

    添加评论

    • Use the spudger, push the two tabs, located in the battery slot, through their slots to release the keyboard.

      • Do this with the computer slightly open for ease.

    添加评论

    • Open the laptop.

    • Start top of the keyboard and use the opening tool to pop the remaining tabs around the keyboard loose.

    • The keyboard can be flipped onto its face once removed.

    添加评论

    • Use the spudger and slide the grey tabs on either side of the keyboard wires away from the white plastic.

    添加评论

    • Disconnect the keyboard by pulling the blue tape on the wire strip.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Lakbira Sheffield

于2018年01月29日注册

583 信誉积分

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 41