简介

This guide will take a user through the replacement of the hard of drive.

配件

无需配件。

  1. Use a J0 JIS screwdriver to remove 17 7mm screws from the back case. They can be located on the underside of the device.
    • Use a J0 JIS screwdriver to remove 17 7mm screws from the back case. They can be located on the underside of the device.

    添加评论

  2. Remove the plastic tab on the left edge of the device.
    • Remove the plastic tab on the left edge of the device.

    添加评论

    • Lift up the back case to remove it.

    添加评论

    • The first thing that should be done it locate the the hard drive.Which is the large green blue rectangle on the left side

    添加评论

    • The removal of the hard drive is actually a fairly easy thing to remove the only step is that the user should pull the black bundle cable from its slot by its purple tab.

    添加评论

    • And then simple lift and remove and thats it the hard drive has been removed from its slot and is ready for its replacement.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Anthony hough

于2017年09月20日注册

101 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 6

总计 87