简介

If your hard drive is no longer working, this guide will help you replace it.

配件

无需配件。

  1. Close the netbook and turn it over so the back panel faces you.
    • Close the netbook and turn it over so the back panel faces you.

  2. Locate the 4 mm Phillips #1 screw at the bottom of the back panel. Using the Phillips head screwdriver, remove the screw. Place the screw somewhere it will not be lost. Then remove the back panel by gently sliding it towards the front.
    • Locate the 4 mm Phillips #1 screw at the bottom of the back panel. Using the Phillips head screwdriver, remove the screw. Place the screw somewhere it will not be lost. Then remove the back panel by gently sliding it towards the front.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. After removing the back panel, locate the hard drive.
    • After removing the back panel, locate the hard drive.

  5. Carefully lift up the hard drive.
    • Carefully lift up the hard drive.

  6. Locate the two 4 mm Philips #1 screws holding the hard drive into its bracket. Remove the two screws and place them somewhere they will not be lost.
    • Locate the two 4 mm Philips #1 screws holding the hard drive into its bracket.

    • Remove the two screws and place them somewhere they will not be lost.

  7. Unplug the hard drive from the bracket. Unplug the hard drive from the bracket.
    • Unplug the hard drive from the bracket.

结论

To reassemble your device, follow these instructions in reverse order.

Wade Vierheller

于2015年01月30日注册

536 信誉积分

创作了5篇指南

tiene 4 ram hasta cuanto soporta gracias...

elteto77 - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 9

过去的30天: 30

总计 1,625