跳转到主内容

配件

没有特定配件。

  1. Shut the netbook off (Power down netbook at top left corner).
    • Shut the netbook off (Power down netbook at top left corner).

  2. Close the netbook and flip it over so that the back is facing up.
    • Close the netbook and flip it over so that the back is facing up.

  3. Slide the button below the battery to the right while simultaneously pulling the battery out.
    • Slide the button below the battery to the right while simultaneously pulling the battery out.

  4. Remove the old battery and get the replacement battery. Remove the old battery and get the replacement battery.
    • Remove the old battery and get the replacement battery.

  5. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  6. Check the thin groves on the side of the battery entry and line the replacement battery up to that.
    • Check the thin groves on the side of the battery entry and line the replacement battery up to that.

  7. Remove black rubber clip located on the bottom right and left of the netbook screen. Next, untighten the screws. Remove black rubber clip located on the bottom right and left of the netbook screen. Next, untighten the screws.
    • Remove black rubber clip located on the bottom right and left of the netbook screen. Next, untighten the screws.

  8. Remove the screws under the black caps. Remove the screws under the black caps.
    • Remove the screws under the black caps.

  9. Slowly separate the screen casing from the screen. Be careful when detaching the screen casing from the screen. If is not done slowly it can break. Be careful when detaching the screen casing from the screen. If is not done slowly it can break.
    • Slowly separate the screen casing from the screen.

    • Be careful when detaching the screen casing from the screen. If is not done slowly it can break.

  10. Remove the screws located on the four corners of the screen. Remove the screws located on the four corners of the screen. Remove the screws located on the four corners of the screen.
    • Remove the screws located on the four corners of the screen.

  11. Remove the two bottom screws. Taking out these screws will allow you to remove the screen from its attachment. Taking out these screws will allow you to remove the screen from its attachment.
    • Remove the two bottom screws.

    • Taking out these screws will allow you to remove the screen from its attachment.

  12. On the bottom left of the screen there is a cord attached. Remove the tape that is attached to the screen. On the bottom left of the screen there is a cord attached. Remove the tape that is attached to the screen. On the bottom left of the screen there is a cord attached. Remove the tape that is attached to the screen.
    • On the bottom left of the screen there is a cord attached. Remove the tape that is attached to the screen.

  13. On the green board, unscrew the two screens. Remove the board. Remove the board.
    • On the green board, unscrew the two screens.

    • Remove the board.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Christian Barboza

于2015年10月25日注册

791 信誉积分

创作了5篇指南

团队

UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 的会员

UMASSD-GULBRANDSEN-F15S5G6

3 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 10

过去的30天: 30

总计 2,098