Skip to main content

配件

没有特定配件。

  1. Shut the netbook off (Power down netbook at top left corner).
    • Shut the netbook off (Power down netbook at top left corner).

  2. Close the netbook and flip it over so that the back is facing up.
    • Close the netbook and flip it over so that the back is facing up.

  3. Slide the button below the battery to the right while simultaneously pulling the battery out.
    • Slide the button below the battery to the right while simultaneously pulling the battery out.

  4. Remove the old battery and get the replacement battery. Remove the old battery and get the replacement battery.
    • Remove the old battery and get the replacement battery.

  5. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  6. Check the thin groves on the side of the battery entry and line the replacement battery up to that.
    • Check the thin groves on the side of the battery entry and line the replacement battery up to that.

  7. Use the wedge tool to pluck off the keyboard key.
    • Use the wedge tool to pluck off the keyboard key.

    • If it's just a broken key just pluck the broken key out and take the new replacement key and press it down over the mechanism. If you need to repair the key follow the steps below.

  8. With the wedge tool pull up on the upper portion on both sides of the mechanism until it pops off from the key socket. With the wedge tool pull up on the upper portion on both sides of the mechanism until it pops off from the key socket.
    • With the wedge tool pull up on the upper portion on both sides of the mechanism until it pops off from the key socket.

  9. Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat. Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat. Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat.
    • Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat.

  10. Position the pivoting smaller piece of the key mechanism in the lower hooks of the key socket. Then slide your finger across the upper portion of the key mechanism so that it locks in place with the upper hooks of the key socket.
    • Position the pivoting smaller piece of the key mechanism in the lower hooks of the key socket. Then slide your finger across the upper portion of the key mechanism so that it locks in place with the upper hooks of the key socket.

  11. Place the key freely on top of the mechanism and press it down firmly until the key locks in place.
    • Place the key freely on top of the mechanism and press it down firmly until the key locks in place.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Christian Barboza

于2015年10月25日注册

791 Reputation

创作了5篇指南

Team

UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 的会员

UMASSD-GULBRANDSEN-F15S5G6

3 名成员

创作了10篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 27

All Time: 2,096