简介

The first step will be to remove all the screws from the back cover of the device. Then we will remove the back cover. Next, we will remove the screw holding the battery in place. Once that is complete the battery will be unplugged and removed. These steps will be repeated in reverse to put everything back together.

  1. Remove all 18 marked screws (2.12 mm) using a Phillips #1 Screwdriver.
    • Remove all 18 marked screws (2.12 mm) using a Phillips #1 Screwdriver.

    添加评论

  2. Use the spudger to slowly work your way around the perimeter starting at the marked location to pop the bottom cover off.
    • Use the spudger to slowly work your way around the perimeter starting at the marked location to pop the bottom cover off.

    添加评论

    • Remove the 1 marked screw (3.3 mm) holding the battery in place using a Phillips #1 Screwdriver.

    添加评论

    • Unplug the marked plug from the motherboard and this will complete the removal of the battery.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Daniel Bates

于2018年01月29日注册

154 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 11

过去的30天: 28

总计 174