跳转到主内容

简介

Guide on switching out the ram on the Acer Aspire E5-573G. Useful for replacing faulty ram, adding a new stick of ram, or upgrading RAM.

  1. Ensure your device is OFF before beginning this procedure.
    • Ensure your device is OFF before beginning this procedure.

    • Unscrew the 5 mm Phillips head screw holding the drive in place.

  2. Pull out the disk drive.
    • Pull out the disk drive.

  3. Unscrew all 17 (5mm) Philips head screws from the bottom. Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.
    • Unscrew all 17 (5mm) Philips head screws from the bottom.

    • Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.

  4. Run a pick around the edge of the laptop (between the two parts) to open it. Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.
    • Run a pick around the edge of the laptop (between the two parts) to open it.

    • Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.

  5. Release the two holding pins. Pull out the ram.
    • Release the two holding pins.

    • Pull out the ram.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Alex Bahm

于2018年01月18日注册

1,957 信誉积分

创作了6篇指南

团队

Cal Poly, Team S12-G5, Banghart Winter 2018 Cal Poly, Team S12-G5, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S12G5

2 名成员

创作了15篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 5

过去的30天: 44

总计 2,115