Remove the 4 rubber supports from the screen. Then remove the screws underneath.
  • Remove the 4 rubber supports from the screen. Then remove the screws underneath.

添加评论

With a spudger, release the clips that hold the plastic frame to the back cover. Be careful while handling the bottom part, specially with the hinges, as there are cables inside.
  • With a spudger, release the clips that hold the plastic frame to the back cover.

  • Be careful while handling the bottom part, specially with the hinges, as there are cables inside.

添加评论

When all the clips are out, the entire plastic frame should come out easily.
  • When all the clips are out, the entire plastic frame should come out easily.

添加评论

Carefully disconnect the camera cable. Carefully disconnect the camera cable.
  • Carefully disconnect the camera cable.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Remove the 4 screws located in the sides of the LCD screen. Remove the 4 screws located in the sides of the LCD screen.
  • Remove the 4 screws located in the sides of the LCD screen.

添加评论

Remove the other 4 screws that secure the metal LCD frame to the hinges.
  • Remove the other 4 screws that secure the metal LCD frame to the hinges.

添加评论

Take the LCD screen out of the metal frame and flip it towards the keyboard. Take the LCD screen out of the metal frame and flip it towards the keyboard. Take the LCD screen out of the metal frame and flip it towards the keyboard.
  • Take the LCD screen out of the metal frame and flip it towards the keyboard.

添加评论

Remove the tape that holds the display cable. Be careful not to take the entire tape away, as this may cause severe damage to the cable.
  • Remove the tape that holds the display cable.

  • Be careful not to take the entire tape away, as this may cause severe damage to the cable.

添加评论

Carefully disconnect the cable with a spuger. Carefully disconnect the cable with a spuger.
  • Carefully disconnect the cable with a spuger.

添加评论

Unstick the cables from the back of the LCD screen. The LCD should be completely free, so just take it out and install a new one.
  • Unstick the cables from the back of the LCD screen.

  • The LCD should be completely free, so just take it out and install a new one.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

TechStem

于2010年03月30日注册

440 信誉积分

撰写一个指南

Hi there.. I just bought a display for my aspire 5536 and it seems it has a different fitting for the cable.. in fact I bought an LED display and the original one was an LCD (there is an inverter fitted in the lid under the screen) ok.. my question.. Is that possible under any circumstances to fit this new LED screen in my laptop by changing the video cable with a proper one for this new screen??

Law199 - 回复

Hi, thanks for the info. Can you tell me the part number of the LCD screen? thanks.

pandearroz - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 17

总计 6,191