跳转到主内容

Acer Aspire 5334-2581 Screen Replacement

你所需要的

  1. Acer Aspire 5334-2581 Screen Replacement, Battery: 步骤 1 中的图像 1,1
    • Please make sure your device is unplugged . Turn it over slowly, and place it on a flat surface.

  2. Acer Aspire 5334-2581 Screen Replacement: 步骤 2 中的图像 1,1
    • This latch holds your battery in place, it should always be locked. Make sure to unlock this piece.

    • Do not break this latch, otherwise your battery will not hold in place.

  3. Acer Aspire 5334-2581 Screen Replacement: 步骤 3 中的图像 1,1
    • Locate the eject latch and push it so the battery can come out.

    • The battery will lift up once you have pushed the latch.

    • You DO NOT need to adjust the latch when replacing the new battery, because it just snaps in place.

  4. Acer Aspire 5334-2581 Screen Replacement: 步骤 4 中的图像 1,1
    • Lift the battery up, and it should just come right off. You should see the label with the part number.

  5. Acer Aspire 5334-2581 Screen Replacement, Screen: 步骤 5 中的图像 1,1
    • Remove the 4 rubber supports from the screen. Then remove the screws underneath.

  6. Acer Aspire 5334-2581 Screen Replacement: 步骤 6 中的图像 1,1
    • With a spudger, release the clips that hold the plastic frame to the back cover.

    • Be careful while handling the bottom, there are cable connections, and you don't want to damage them

  7. Acer Aspire 5334-2581 Screen Replacement: 步骤 7 中的图像 1,1
    • With caution disconnect the camera cable.

  8. Acer Aspire 5334-2581 Screen Replacement: 步骤 8 中的图像 1,2 Acer Aspire 5334-2581 Screen Replacement: 步骤 8 中的图像 2,2
    • Remove the 4 screws in the side of the LCD. Screen should be able to come of the frame

  9. Acer Aspire 5334-2581 Screen Replacement: 步骤 9 中的图像 1,1
    • Take the screen and flip on top of the keyboard.

    • Unplug the cable connected to the video card.

    • Don't use too much force, you don't want to damage this component.

  10. Acer Aspire 5334-2581 Screen Replacement: 步骤 10 中的图像 1,2 Acer Aspire 5334-2581 Screen Replacement: 步骤 10 中的图像 2,2
    • Remove the tape, and unplug the display cable.

    • Unstick the cable from the back of the LCD, and now the LCD is free to come off. You are ready to install a new one

    • Try not to damage this cable, otherwise replacing it would be so much pain.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

团队

UMass Dartmouth, Team 1-2, Catania Fall 2016 UMass Dartmouth, Team 1-2, Catania Fall 2016 的会员

UMASSD-CATANIA-F16S1G2

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 4

总计 360