1. Turn the laptop over.
    • Turn the laptop over.

    添加评论

  2. "Unlock" your battery by moving the switch as shown so that an unlocked lock on a red background is shown.
    • "Unlock" your battery by moving the switch as shown so that an unlocked lock on a red background is shown.

    添加评论

    • Next move the other switch, while the unlocked symbol is still showing. The battery should pop up, and no longer be flush with the bottom of the laptop.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Now remove the battery by lifting it out of the laptop by the side closest to the switches.

    添加评论

    • You have successfully removed the battery. Congratulations!

    添加评论

    • Now, locate the two screws that hold the back cover panel onto the laptop.

    添加评论

    • Unscrew both of the screws that are holding the back panel in place with the Philips #00 head.

    • The screws are 3/8" in length and have a 1/4" head.

    添加评论

    • Once both screws have been removed use a plastic opening tool to lift the panel up. Starting with the indented notch , and moving left and right from there.

    添加评论

    • After the panel has been loosened by the plastic opening tool, take your finger, place it in the gap, and remove the panel from the laptop.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Nathan Hanson

于2014年04月08日注册

501 信誉积分

创作了2篇指南

团队

Cal Poly, Team 8-11, Regan Spring 2014 Cal Poly, Team 8-11, Regan Spring 2014 的会员

CPSU-REGAN-S14S8G11

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 17

总计 2,054