跳转到主内容

简介

The stand supports the monitor from falling over.

  1. Lay the monitor on a flat surface so that the back is facing up.
    • Lay the monitor on a flat surface so that the back is facing up.

  2. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  3. Grab the hinge cover with both hands on either side of the stand. Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.
    • Grab the hinge cover with both hands on either side of the stand.

    • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

  4. Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor. Support the monitor while removing the screws to prevent the monitor from falling.
    • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

    • Support the monitor while removing the screws to prevent the monitor from falling.

    • Lift up to detach the stand.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Keith

于2011年10月06日注册

279 信誉积分

创作了4篇指南

团队

Cal Poly, Team 20-26, Maness Fall 2011 Cal Poly, Team 20-26, Maness Fall 2011 的会员

CPSU-MANESS-F11S20G26

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 15

过去的7天: 124

过去的30天: 416

总计 7,848