跳转到主内容

Acer AL1714 Power Supply Board

你所需要的

  1. Acer AL1714 Power Supply Board, Power Supply Board: 步骤 1 中的图像 1,2 Acer AL1714 Power Supply Board, Power Supply Board: 步骤 1 中的图像 2,2
    • Turn the monitor facedown.

    • Unscrew the 5 screws holding the back cover on.

    • (This may require flipping the monitor over and shaking the screws loose once they're already unscrewed)

  2. Acer AL1714 Power Supply Board: 步骤 2 中的图像 1,3 Acer AL1714 Power Supply Board: 步骤 2 中的图像 2,3 Acer AL1714 Power Supply Board: 步骤 2 中的图像 3,3
    • Take the edge tool or a metal ruler and insert it into bezel.

    • Apply pressure and push down.

    • Do the same to the right side.

    • Once the side of the bezel facing you is decoupled, take the back cover and pry it loose.

  3. Acer AL1714 Power Supply Board: 步骤 3 中的图像 1,3 Acer AL1714 Power Supply Board: 步骤 3 中的图像 2,3 Acer AL1714 Power Supply Board: 步骤 3 中的图像 3,3
    • Remove the Flat Flex Cable from the Power Supply board under the metal cover.

    • Pull the cord back and out of the way.

    • (It may be stuck down with adhesive)

  4. Acer AL1714 Power Supply Board: 步骤 4 中的图像 1,3 Acer AL1714 Power Supply Board: 步骤 4 中的图像 2,3 Acer AL1714 Power Supply Board: 步骤 4 中的图像 3,3
    • Unscrew the cord anchors for the VGA port.

    • (Use needle nose pliers if they're too tight for removal by hand)

  5. Acer AL1714 Power Supply Board: 步骤 5 中的图像 1,2 Acer AL1714 Power Supply Board: 步骤 5 中的图像 2,2
    • Turn the monitor around.

    • Unscrew the 1 screw holding the Flat Power Cable cover in place.

    • Lift up and remove the Flat Power Cable cover.

    • (Careful: it may be sharp)

  6. Acer AL1714 Power Supply Board: 步骤 6 中的图像 1,1
    • Unscrew the 5 screws holding the metal cage on.

  7. Acer AL1714 Power Supply Board: 步骤 7 中的图像 1,2 Acer AL1714 Power Supply Board: 步骤 7 中的图像 2,2
    • Turn the monitor around.

    • Lift up on the back of the metal cage slightly.

    • Pull the cage toward self.

    • (Must be careful to free the cover of the VGA port and power supply input)

  8. Acer AL1714 Power Supply Board: 步骤 8 中的图像 1,3 Acer AL1714 Power Supply Board: 步骤 8 中的图像 2,3 Acer AL1714 Power Supply Board: 步骤 8 中的图像 3,3
    • Lift up on the Flat Flex Cable holder tabs to release the cords.

    • Lift up on the Flat Flex Cables and bend them out of the working area.

  9. Acer AL1714 Power Supply Board: 步骤 9 中的图像 1,3 Acer AL1714 Power Supply Board: 步骤 9 中的图像 2,3 Acer AL1714 Power Supply Board: 步骤 9 中的图像 3,3
    • Unplug the 4 backlight wires from their ports on the Power Supply Board.

    • (Considering their size, the best way to unplug the backlight wires is by slowly jiggling and pulling the wires out of place)

  10. Acer AL1714 Power Supply Board: 步骤 10 中的图像 1,1
    • Unscrew the 5 screws holding the joined Power Supply and Video Display boards on.

  11. Acer AL1714 Power Supply Board: 步骤 11 中的图像 1,2 Acer AL1714 Power Supply Board: 步骤 11 中的图像 2,2
    • Lift and remove the joined Power Supply and Video Display boards.

  12. Acer AL1714 Power Supply Board: 步骤 12 中的图像 1,3 Acer AL1714 Power Supply Board: 步骤 12 中的图像 2,3 Acer AL1714 Power Supply Board: 步骤 12 中的图像 3,3
    • Carefully detach the Power Supply and Video Display boards at their connector joint.

    • Replace the Power Supply Board with a new part.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

USF Tampa, Team 1-3, Brown Fall 2014 USF Tampa, Team 1-3, Brown Fall 2014 的会员

USFT-BROWN-F14S1G3

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 6

总计 1,184