修复你的物品 社区 商店

Abask J05 Front Case Replacement

你所需要的

  1. Abask J05 Front Case Replacement, Front Case: 步骤 1 中的图像 1，2 Abask J05 Front Case Replacement, Front Case: 步骤 1 中的图像 2，2

    • Gently press on the SD card with a fingernail until it clicks.

    • Release, then remove the card.

    编辑

  2. Abask J05 Front Case Replacement: 步骤 2 中的图像 1，1

    • Remove the 5 mm screw from the side of the device next to the suction cup dock with a Phillips #00 screwdriver.

    编辑

  4. Abask J05 Front Case Replacement: 步骤 3 中的图像 1，2 Abask J05 Front Case Replacement: 步骤 3 中的图像 2，2

    • Remove the two 8 mm screws from opposite sides of the screen with a Phillips #00 precision screwdriver.

    编辑

  5. Abask J05 Front Case Replacement: 步骤 4 中的图像 1，2 Abask J05 Front Case Replacement: 步骤 4 中的图像 2，2

    • Gently lift the screen.

    • Push up on the interior camera portion of the device. It should pop out of the socket. Being careful to keep the wires attached, set it to the side.

    编辑

  6. Abask J05 Front Case Replacement: 步骤 5 中的图像 1，2 Abask J05 Front Case Replacement: 步骤 5 中的图像 2，2

    • Reach into the device with a spudger to release the top two snap joints keeping the end cap attached one at a time until the front face lifts off.

    • Be careful not to touch the screen.

    • Repeat the process with the two remaining snap joints.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

Kristen Gismondi

于11/12/14注册

85,242 声望

创作了215篇指南

徽章: 46

+ 43更多徽章

团队

iFixit iFixit 的会员

Staff

140 名成员

创作了18,065篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 3

总计 13