跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide will show you how to replace the speaker for your EL52300 handset. This guide involves direct contact with the motherboard, as well as use of a soldering tool. Any safety precautions present in the motherboard replacement guide for this device, or the soldering guide for this website must be followed.

  1. Find the bump where the battery cover meets the phone. Put your thumb here, and push and slide the cover down. Find the bump where the battery cover meets the phone. Put your thumb here, and push and slide the cover down.
    • Find the bump where the battery cover meets the phone. Put your thumb here, and push and slide the cover down.

  2. Unplug the battery by squeezing your hands on the small white plug and lifting it up.
    • Unplug the battery by squeezing your hands on the small white plug and lifting it up.

    • Do not pull on the wire itself because you might damage the wire!

    • The battery is now detached and ready to be removed by lifting it out.

  3. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  4. Remove the two 3.75 mm screws with a PH1 screwdriver. Remove the two 3.75 mm screws with a PH1 screwdriver.
    • Remove the two 3.75 mm screws with a PH1 screwdriver.

  5. Use a plastic opening tool to remove the handset case. Be careful to not lift the case too far as the ringer cable is attached to the case.
    • Use a plastic opening tool to remove the handset case.

    • Be careful to not lift the case too far as the ringer cable is attached to the case.

  6. Remove the two 3.65 mm screws on the motherboard with  a PH1 screwdriver. Use an anti-static wrist strap to prevent damage to the motherboard.
    • Remove the two 3.65 mm screws on the motherboard with a PH1 screwdriver.

    • Use an anti-static wrist strap to prevent damage to the motherboard.

  7. Using the soldering tool, disconnect the speaker from your handset's motherboard.
    • Using the soldering tool, disconnect the speaker from your handset's motherboard.

    • Please refer to the 如何焊接和拆焊 for instructions on how to solder.

结论

To reassemble your device, follow these instructions in reverse order.

Eddie Barnes

于2016年02月10日注册

263 信誉积分

撰写一个指南

团队

USF Tampa, Team 1-1, Sullivan Spring 2016 USF Tampa, Team 1-1, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S1G1

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 230