跳转到主内容

简介

Replacing the circuit in the charging cradle

配件

没有特定配件。

  1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: 步骤 1 中的图像 1,3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: 步骤 1 中的图像 2,3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: 步骤 1 中的图像 3,3
    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

  2. ASUS ZenWatch Charging Cradle Circuit board Replacement: 步骤 2 中的图像 1,3 ASUS ZenWatch Charging Cradle Circuit board Replacement: 步骤 2 中的图像 2,3 ASUS ZenWatch Charging Cradle Circuit board Replacement: 步骤 2 中的图像 3,3
    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

结论

To reassemble your device, follow these instructions in reverse order.

Wayne McClure

于2016年02月10日注册

952 声望

创作了5篇指南

团队

USF Tampa, Team 1-3, Sullivan Spring 2016 USF Tampa, Team 1-3, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S1G3

4 名成员

创作了7篇指南

一条评论

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 13

总计 2,686