ASUS ZenPad S 8.0 Daughter Board Replacement

简介

This is a guide outlining how to remove and replace the daughter board (also known secondary board). Make sure the battery is completely removed before working on the daughter board as to prevent shorts in the circuitry As a precautions ground yourself to prevent frying the internal components. Also make sure to keep track of screws and label them.

你所需要的

步骤 1 Rear Cover Removal

ASUS ZenPad S 8.0 Daughter Board Replacement, Rear Cover Removal: 步骤 1 中的图像 1，3

ASUS ZenPad S 8.0 Daughter Board Replacement, Rear Cover Removal: 步骤 1 中的图像 2，3

ASUS ZenPad S 8.0 Daughter Board Replacement, Rear Cover Removal: 步骤 1 中的图像 3，3

if present, remove the MicroSD card before disassembly. Failure to remove could lead to damage to the MicroSD card , rear cover, or MicroSD card slot.
Use the plastic tool to pry between the silver bezel and the back case
Work the tool around the device to free the back case

编辑

步骤 2

Remove the ribbon cables by lifting up the white retaining flap on the ZIF connectors, then pulling the ribbon cable away.
Do not kink the ribbon cables as they can break easily

编辑

步骤 3

ASUS ZenPad S 8.0 Daughter Board Replacement: 步骤 3 中的图像 3，3

Remove the battery connector by prying it up away from the device using 2 plastic pry tools

编辑

步骤 4

Remove all 9 of the 1.5mm #00 Philips screws
Gently lift the battery out of the device
Use an opening pick or similar tool to separate the adhesive on the bottom and top of the battery.

编辑

步骤 5 Daughter Board

ASUS ZenPad S 8.0 Daughter Board Replacement, Daughter Board: 步骤 5 中的图像 1，3

ASUS ZenPad S 8.0 Daughter Board Replacement, Daughter Board: 步骤 5 中的图像 2，3

ASUS ZenPad S 8.0 Daughter Board Replacement, Daughter Board: 步骤 5 中的图像 3，3

To remove the ribbon cables, lift up the white retaining flap on the ZIF Connectors with a plastic pry tool

编辑

步骤 6

ASUS ZenPad S 8.0 Daughter Board Replacement: 步骤 6 中的图像 3，3

Using the tweezers gently pull off the tape over the ribbon cable

编辑

步骤 7

Using the tweezers gently pull the ribbon cable out from from the connector.

编辑

步骤 8

ASUS ZenPad S 8.0 Daughter Board Replacement: 步骤 8 中的图像 3，3

Using the tweezers gently remove the connector from the yellow slot

编辑

步骤 9

Cut the warranty tape connecting the daughter board to the metal plate under the battery

编辑

步骤 10

ASUS ZenPad S 8.0 Daughter Board Replacement: 步骤 10 中的图像 3，3

Using the #00 Phillips head screwdriver, remove the remaining 1.5mm screws in the daughter board
Gently lift the daughter board from the device

编辑

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与3其他贡献者

John Astfanous

于10/04/16注册

987 声望

创作了3篇指南

徽章: 9

+ 6更多徽章

团队

USF Tampa, Team 2-2, Cagle Fall 2016 USF Tampa, Team 2-2, Cagle Fall 2016 的会员

USFT-CAGLE-F16S2G2

4 名成员

创作了5篇指南

4条评论

Thanks for helping me fix my beloved Zenpad!

Karen Detter - 2018年2月26日回复

Karen, where did you get the replacement daughter board? I can’t find one anywhere! - Christine

Christine Collister - 2019年3月16日

Bought it here:

https://www.asusparts.eu/en/Asus-90NP01M...

This is Part Number: 32YU1CB0000,

“ASUSparts” internal part number: 90NP01M0-R10010

4andrew - 2019年8月12日回复

Please clarify Step 9 - where exactly is the warranty tape that needs to be cut?

I have this unit and it stopped charging and stopped holding charge- I do not want to buy another unit as I invested a LOT of time in setting this one up…

Thanks

vshulyaker@gmail.com

Vladimir Shulyaker - 2019年10月3日回复

ASUS ZenPad S 8.0 Daughter Board Replacement

简介

你所需要的

步骤 1 Rear Cover Removal

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5 Daughter Board

添加评论

步骤 6

添加评论

步骤 7

添加评论

步骤 8

添加评论

步骤 9

添加评论

步骤 10

添加评论

作者

John Astfanous

团队

USF Tampa, Team 2-2, Cagle Fall 2016 USF Tampa, Team 2-2, Cagle Fall 2016 的会员

4条评论

添加评论

嵌入本指南

预览