简介
This circuit board is directly connected to the USB receivers and is responsible for reading information from USB drives as well as writing information on to USB drives. This board also contains the buttons for power and volume control.
你所需要的
-
-
Remove the ten 10.7 mm screws using a Phillips #0 screwdriver from the back of the laptop.
-
-
在这个步骤中使用的工具:Heavy-Duty Spudger$4.99
-
Using a heavy-duty spudger, pry the back cover up from the frame and completely remove.
-
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.