跳转到主内容

修复你的物品

维修的权力

商店

简介

Need a good selfie? This guide will lead you through replacing your front camera.

  1. Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards. Work your way around the phone until the entire back cover is loose.
    • Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards.

    • Work your way around the phone until the entire back cover is loose.

  2. Remove the thirteen 3.6 mm screws using the Torx T5 bit in the screwdriver. Remove the thirteen 3.6 mm screws using the Torx T5 bit in the screwdriver.
    • Remove the thirteen 3.6 mm screws using the Torx T5 bit in the screwdriver.

  3. Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards. Work your way around the phone until the entire back cover is loose and remove the mid-frame.
    • Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.

    • Work your way around the phone until the entire back cover is loose and remove the mid-frame.

  4. Using the plastic blue plastic opening tool, gently  disconnect the battery cable from the motherboard.
    • Using the plastic blue plastic opening tool, gently disconnect the battery cable from the motherboard.

    • Applying too much force will damage the connector.

  5. Use the blue plastic opening tool to pry the battery pack from the phone. Pry along edge away from the motherboard as this might damage the motherboard. The battery pack is held on by double sided tape, you will have to apply some force when prying out the battery.
    • Use the blue plastic opening tool to pry the battery pack from the phone. Pry along edge away from the motherboard as this might damage the motherboard.

    • The battery pack is held on by double sided tape, you will have to apply some force when prying out the battery.

  6. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  7. Using a spudger, pry the vibration motor connector from the motherboard.
    • Using a spudger, pry the vibration motor connector from the motherboard.

  8. Use the blue plastic opening tool to gently pry the camera connector up from its socket on the motherboard.
    • Use the blue plastic opening tool to gently pry the camera connector up from its socket on the motherboard.

    • Applying too much force will damage the conector

  9. Using the tweezers, remove the rear camera from the Padfone X.
    • Using the tweezers, remove the rear camera from the Padfone X.

    • The camera is lightly glued to the motherboard. You may need to use a plastic opening tool to loosen the adhesive under the camera.

  10. Insert the tip of the flat head screwdriver between the panel and the metal clip then gently push down until the clip is slightly bent away from the panel. Do this for all the clips holding the panel down.
    • Insert the tip of the flat head screwdriver between the panel and the metal clip then gently push down until the clip is slightly bent away from the panel.

    • Do this for all the clips holding the panel down.

    • After all clips are bent away, remove the panel.

  11. Disconnect the first connector by prying it upward using the blue plastic opening tool. Disconnect the second connector by first lifting the lock then pulling the connector outward.
    • Disconnect the first connector by prying it upward using the blue plastic opening tool.

    • Disconnect the second connector by first lifting the lock then pulling the connector outward.

  12. Insert the tip of the blue plastic opening tool under the motherboard and gently pry upward. Work your way around until the motherboard is free. Work your way around until the motherboard is free.
    • Insert the tip of the blue plastic opening tool under the motherboard and gently pry upward.

    • Work your way around until the motherboard is free.

  13. Flip the motherboard over and locate the front facing camera.
    • Flip the motherboard over and locate the front facing camera.

    • Using the tweezers gently remove the black locking mechanism.

    • The black locking mechanism is very fragile and extreme care should be exercised during removal.

  14. Use the tweezers to gently pull on the connector to remove the camera. Use the tweezers to gently pull on the connector to remove the camera.
    • Use the tweezers to gently pull on the connector to remove the camera.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Keith Cooper

于2017年01月24日注册

122 信誉积分

撰写一个指南

团队

IUPUI, Team 2-1, Baechle Spring 2017 IUPUI, Team 2-1, Baechle Spring 2017 的会员

IUPUI-BAECHLE-S17S2G1

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 198