跳转到主内容

简介

This guide will detail how to remove and replace the back case of the device. This will give you access to the inner parts of the laptop.

配件

没有特定配件。

  1. Turn the laptop off and unplug all cables. Flip over so the bottom is facing you.
    • Turn the laptop off and unplug all cables.

    • Flip over so the bottom is facing you.

    • Remove the ten 3mm Torx T5 screws from the bottom cover.

  2. Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open. Run the spudger along the perimeter of the bottom cover to remove.
    • Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open.

    • Run the spudger along the perimeter of the bottom cover to remove.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Steven Hahn

于2018年01月29日注册

785 信誉积分

创作了6篇指南

团队

USF Tampa, Team S5-G1, Passmore Spring 2018 USF Tampa, Team S5-G1, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S5G1

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 20

总计 557