跳转到主内容

简介

This guide will show you how to remove the back panel of an Asus K200MA laptop.

  1. With the opening facing you, flip the laptop over and remove the following screws from the back panel: Six 4mm Phillips screws using a Phillips #0 screwdriver.
    • With the opening facing you, flip the laptop over and remove the following screws from the back panel:

    • Six 4mm Phillips screws using a Phillips #0 screwdriver.

    • One 12mm Phillips screw in the center using a Phillips #0 screwdriver.

  2. Using a plastic spudger, remove the two rubber stoppers closest to the hinge to reveal the screws underneath. Using a plastic spudger, remove the two rubber stoppers closest to the hinge to reveal the screws underneath.
    • Using a plastic spudger, remove the two rubber stoppers closest to the hinge to reveal the screws underneath.

  3. Remove the following screws:
    • Remove the following screws:

    • Two 4mm Phillips screws using a Phillips #0 screwdriver.

  4. Using a plastic spudger (and a fair amount of force), pry the back panel up from the keyboard to separate. You may have to use one spudger to wedge between the back panel and keyboard while using another to pry it open in a different spot. You may have to use one spudger to wedge between the back panel and keyboard while using another to pry it open in a different spot.
    • Using a plastic spudger (and a fair amount of force), pry the back panel up from the keyboard to separate.

    • You may have to use one spudger to wedge between the back panel and keyboard while using another to pry it open in a different spot.

结论

To reassemble your device, follow these instructions in reverse order.

Haleigh St. Paul

于2018年09月17日注册

239 信誉积分

撰写一个指南

团队

CSU Fullerton, Team S2-G5, Bruce Fall 2018 CSU Fullerton, Team S2-G5, Bruce Fall 2018 的会员

CSUF-BRUCE-F18S2G5

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 121