跳转到主内容

AKASO KingPad A90 Rear Speaker Replacement

你所需要的

  1. AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: 步骤 1 中的图像 1,3 AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: 步骤 1 中的图像 2,3 AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: 步骤 1 中的图像 3,3
    • Remove screws.

    • Insert spudger tool on the middle of the left side, between the white and black plastic.

    • Slide in a plastic opening tool and use it to further pull the back off.

    • Work your way around the edge of the tablet with the plastic opening tool and insert more as needed.

    • Pull off the back cover.

  2. AKASO KingPad A90 Rear Speaker Replacement: 步骤 2 中的图像 1,3 AKASO KingPad A90 Rear Speaker Replacement: 步骤 2 中的图像 2,3 AKASO KingPad A90 Rear Speaker Replacement: 步骤 2 中的图像 3,3
    • Plug in soldering iron and let it warm up for ten minutes.

    • Locate the speaker solder points and note where it is attached to the motherboard.

    • Solder the old speaker out of its mark. (Touch the tip of the solder iron to the soldering point).

  3. AKASO KingPad A90 Rear Speaker Replacement: 步骤 3 中的图像 1,3 AKASO KingPad A90 Rear Speaker Replacement: 步骤 3 中的图像 2,3 AKASO KingPad A90 Rear Speaker Replacement: 步骤 3 中的图像 3,3
    • Solder the new speaker onto the points where the old speaker was.

  4. AKASO KingPad A90 Rear Speaker Replacement: 步骤 4 中的图像 1,3 AKASO KingPad A90 Rear Speaker Replacement: 步骤 4 中的图像 2,3 AKASO KingPad A90 Rear Speaker Replacement: 步骤 4 中的图像 3,3
    • Replace the back cover with the new rear speaker unit in place.

    • Gently press the speaker into place.

    • Don't let the volume rocker unit fall out of place.

    • Replace the screws.

终点

camchristo

于03/24/15注册

71 声望

撰写一个指南

团队

UMass Dartmouth, Team 4-6, Vijaybhaskar Spring 2015 UMass Dartmouth, Team 4-6, Vijaybhaskar Spring 2015 的会员

UMASSD-VIJAYBHASKAR-S15S4G6

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 3

总计 361