跳转到主内容

简介

The keypad is an extremely important component of the ACN Iris WG4K. It is important because it is the only way you can interact with your device. It recieves all of its commands through the soft keys. If the keypad no longer works, lags, or is damaged, look at this guide for instructions on how to replace it.

配件

没有特定配件。

  1. ACN Iris WG4K Key Pad Replacement, Handset: 步骤 1 中的图像 1,2 ACN Iris WG4K Key Pad Replacement, Handset: 步骤 1 中的图像 2,2
    • Press upwards with your index finger on the 4P4C connector as shown in the image.

    • Pull the connector gently out of its socket.

  2. ACN Iris WG4K Key Pad Replacement, Lower Case: 步骤 2 中的图像 1,1
    • Flip the main body of the video phone so that the bottom is facing up.

    • Use the Phillips #0 Screwdriver to remove the four Phillips head screws (6 mm) highlighted by the red circles.

  3. ACN Iris WG4K Key Pad Replacement: 步骤 3 中的图像 1,2 ACN Iris WG4K Key Pad Replacement: 步骤 3 中的图像 2,2
    • Lift the back case upwards to expose the inside components.

    • Red rectangles indicate the three ribbon cables.

    • The orange square indicates the blade connector.

  4. ACN Iris WG4K Key Pad Replacement: 步骤 4 中的图像 1,3 ACN Iris WG4K Key Pad Replacement: 步骤 4 中的图像 2,3 ACN Iris WG4K Key Pad Replacement: 步骤 4 中的图像 3,3
    • Disconnect the three ribbon cables from their insulation-displacement connectors by flipping up the black plastic clip.

    • Gently pull the ribbon cables out of their insulation-displacement connectors.

  5. ACN Iris WG4K Key Pad Replacement: 步骤 5 中的图像 1,2 ACN Iris WG4K Key Pad Replacement: 步骤 5 中的图像 2,2
    • Disconnect the blade connector from the blade receptacle by gripping the exposed area of the blade connector.

    • Gently pull the blade connector out of the blade receptacle.

  6. ACN Iris WG4K Key Pad Replacement: 步骤 6 中的图像 1,1
    • Gently lift up the lower case to separate it from the top case.

  7. ACN Iris WG4K Key Pad Replacement, Key Pad: 步骤 7 中的图像 1,1
    • Use the Phillips #0 Screwdriver to remove the four Phillips head screws 6 mm highlighted by the red circles.

  8. ACN Iris WG4K Key Pad Replacement: 步骤 8 中的图像 1,1
    • Gently lift up on the top case to separate it from the keypad/speaker panel.

  9. ACN Iris WG4K Key Pad Replacement: 步骤 9 中的图像 1,2 ACN Iris WG4K Key Pad Replacement: 步骤 9 中的图像 2,2
    • Disconnect the two white 2-pin JST connectors from the keypad/speaker circuit board by tugging gently until they are released.

  10. ACN Iris WG4K Key Pad Replacement: 步骤 10 中的图像 1,1
    • Use the Philips screw driver to remove the four Phillips head screws 6 mm highlighted by the red circles.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Itze Kenney

于2017年02月14日注册

1,066 声望分

创作了9篇指南

团队

USF Tampa, Team 20-4, Remmell Spring 2017 USF Tampa, Team 20-4, Remmell Spring 2017 的会员

USFT-REMMELL-S17S20G4

4 名成员

创作了20篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 137