跳转到主内容

简介

This guide will show you in detail how to remove the AARP RealPad. In order to remove the back cover you will need to know how to use a screwdriver and a suction cup.

  1. Loosen the back cover using the suction cup. Pull up on the center of the back with the suction cup.
    • Loosen the back cover using the suction cup.

    • Pull up on the center of the back with the suction cup.

    • Pull up on all four corners of the back with the suction cup.

  2. Remove the back cover by gently placing the small opening tool  in the crevice created by loosening the back.
    • Remove the back cover by gently placing the small opening tool in the crevice created by loosening the back.

    • Slide the opening tool around the edges of the device.

    • Wedge it open using the opening tool.

    • Use the suction cup again if you're having trouble removing the back cover.

  3. The black tape is stuck to delicate wires; remove with caution. Peel off the silver tape.
    • The black tape is stuck to delicate wires; remove with caution.

    • Peel off the silver tape.

    • Gently pull off the black tape.

  4. Using the JIS #000 screwdriver, remove the two 2.5mm screws. Using the JIS #000 screwdriver, remove the two 2.5mm screws.
    • Using the JIS #000 screwdriver, remove the two 2.5mm screws.

  5. Lift off the black audio cover. Lift off the black audio cover.
    • Lift off the black audio cover.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Alana Escue

于2018年09月18日注册

425 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 12

总计 198