简介
这是MacBook Pro上每次维修的起点。你需要一把P5 五角螺丝刀拆下底壳并进入设备。
'''为了你的安全，请在开始此程序之前将MacBook Pro的电池放电。如果不小心刺破，充电的锂离子电池会产生危险且无法控制的火灾。
你所需要的
-
-
开机，并打开终端。
-
将以下命令复制粘贴到（或完全键入）终端窗口中：
-
sudo nvram AutoBoot=%00
-
按[回车]。如果出现钥匙提示，请输入管理员密码（开机密码）并再次按[回车]。注意：您的回车键也可能标有「⏎」或 return。
-
sudo nvram AutoBoot=%03
-
-
请按逆序重新组装你的设备。
请按逆序重新组装你的设备。
12等其他人完成本指南。
团队
3条评论
Yeah, Ifixit is SOOOOO great except for explaining reassembly steps that don’t just involve ‘reverse order’ like this %#*@ bottom case. I did a whole display (yay me!) and am now stumped as to the last step of reassembly. If you just put it back on and put the screws back in, there’s an increasing gap from the rear 2 screws to where the display hinge begins (that sits flush before taking it off). There seems to be no ‘popping’ it in place and the pegs on the underside of the cover are in the middle.
debmocracy - 回复
@jseliger You’re both right, that was an oversight! It really is pretty much reverse of disassembly, but it can take a little practice. See the final step for some new reassembly tips. Hope this helps!
