2015-2019 Dodge Charger Tail Light Replacement (2015, 2016, 2017, 2018, 2019)

简介

This guide details the process of removing and replacing the tail lights for a 2015-2019 Dodge Charger.

The tail lights are a major safety aspect to vehicles. To ensure everyone’s safety on public roads, it is the driver’s responsibility to replace the tail lights when malfunctioning or worn out.

If your 2015-2019 Dodge Charger tail lights are in need of a replacement due to damage or aesthetic purposes, this guide will provide you with all the necessary steps to replace your taillights with ease.

NOTE: Perform the procedures after the vehicle has been turned off for at least 30 minutes. Make sure to turn off the ignition and engage the parking brake before you begin.

你所需要的

步骤 1 Tail Light

2015-2019 Dodge Charger Tail Light Replacement, Tail Light: 步骤 1 中的图像 1，1

Remove the rear plastic panel cover located inside the trunk by pushing the panel towards the center of the car.

编辑

步骤 2

Remove the plastic screw securing the inner lining of the trunk by pulling outwards.
Do not use excess force as it can damage the screw.

编辑

步骤 3

Remove the plastic pin by prying it outwards using a pry bar to free the inner lining.
Pull back the inner lining to gain access to the screws securing the tail lights in place.

编辑

步骤 4

2015-2019 Dodge Charger Tail Light Replacement: 步骤 4 中的图像 3，3

Remove both 8 mm nuts securing the tail lights in place using an 8 mm wrench.
Remove the nuts carefully as they may fall between the gaps which can be difficult to reach.

编辑