2013 Nissan Rogue Key Fob Battery Replacement

简介

If your 2013 Nissan Rogue car no longer responds to the keyless remote, it is most likely due to a dead battery, which needs to be replaced. I will show you how to remove the battery and replace it properly step by step.

It's important to realize that 2013 Nissan Rogue is a push-to-start vehicle and in order to start the car, the key must be in close proximity. Without a functioning battery, the car will not be able to receive signals from the keyless remote to know it is in proximity to start the car.

你所需要的

步骤 1 Key Fob Battery

2013 Nissan Rogue Key Fob Battery Replacement, Key Fob Battery: 步骤 1 中的图像 1，3

2013 Nissan Rogue Key Fob Battery Replacement, Key Fob Battery: 步骤 1 中的图像 2，3

2013 Nissan Rogue Key Fob Battery Replacement, Key Fob Battery: 步骤 1 中的图像 3，3

Remove the key from the keyring by pulling the button on the back of the keyring from right to left while pulling the loop at the top.

编辑

步骤 2

2013 Nissan Rogue Key Fob Battery Replacement: 步骤 2 中的图像 3，3

Carefully separate the back cover from the rest of the remote.
You can use a tool to make this step easier, or you can just do it using your fingers, being very careful.

编辑

步骤 3

Carefully remove the individual pieces from inside, one at a time.
There are two pieces in total to remove.

编辑

步骤 4

Remove the battery from the remote.
Put the new battery into the remote and press down firmly to make sure it is secure.
Be sure to check that your new battery matches with your old battery.