2012 Volkswagen Touareg Door Lock Switch Replacement

简介

This guide will show you how to replace a door lock switch in a T3 (2010-2018) Volkswagen Touareg. An extra set of hands will make this repair much easier when removing the wiring from the back of the door panel. A lot of the panels that are to be removed contain brittle plastic clips, so proceed with caution.

你所需要的

步骤 1 Door Lock Switch

2012 Volkswagen Touareg Door Lock Switch Replacement, Door Lock Switch: 步骤 1 中的图像 1，1

Remove the door pull trim piece using a nylon offset v-notch prying tool.

编辑

步骤 2

Remove the T20 Torx bolt underneath the door trim pull piece.

编辑

步骤 3

Remove the armrest by firmly pulling up on the cover.

编辑

步骤 4

Remove the wiring from the window switch.

编辑

步骤 5

Remove the two T20 Torx bolts that were originally underneath the armrest cover.

编辑

步骤 6

Remove the belt line trim piece carefully with a trim removal tool.
This trim can be very brittle.

编辑

步骤 7

Remove the T20 Torx bolt that is underneath the belt line trim piece.

编辑

步骤 8

Remove the T20 Torx bolt at the very bottom of the door panel.

编辑

步骤 9

Use a trim removal tool to release the clips on the bottom side of the door panel.

编辑

步骤 10

Once all of the clips are released, use the door pull and lift the door panel off of the top of the door frame.

编辑

步骤 11

Remove the tweeter wiring.
This plug will be wrapped in a grey styrofoam-like material.

编辑

步骤 12

Remove the main door harness from the door control module.
This will be a light blue plug with a pink lock.

编辑

步骤 13

Now that the wiring is removed from the door panel, distinguish which plug is the door lock switch.
It will be located in the top of the door panel. The back of the switch will be blue.

编辑