简介

Fuses are used in electronics to protect electrical components from being exposed to excess current from the power supply. The fuse melts during a surge and breaks the circuit to protect the valuable electrical component. The element associated with a blown fuse will be disabled until the fuse is replaced.

Turn off the vehicle before beginning the fuse changing process to avoid electrocution.
  • Turn off the vehicle before beginning the fuse changing process to avoid electrocution.

  • Pull on the lever by the driver's feet.

  • Move to the front of the vehicle.

  • There is a latch below the center of the hood, push it to the left.

  • Lift the hood and support it with the hood strut.

添加评论

Locate the fuse box on the driver’s side of the hood compartment.
  • Locate the fuse box on the driver’s side of the hood compartment.

  • Disengage the latch located on the side of the fuse box.

  • Swing the lid open.

添加评论

  • Referencing the manufacturer's exterior fuse box diagram, identify the fuse that needs replacement.

添加评论

  • Carefully remove the fuse that corresponds to the electrical failure in the vehicle.

  • Check for damage or discoloration in the fuse.

  • Replace the damaged fuse with the new fuse.

  • Close the fuse box.

添加评论

结论

To reassemble, follow these instructions in reverse order.

Christopher Pell

于2012年09月26日注册

173 信誉积分

创作了5篇指南

团队

Cal Poly, Team 15-45, Forte Fall 2012 Cal Poly, Team 15-45, Forte Fall 2012 的会员

CPSU-FORTE-F12S15G45

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 44

总计 4,774