2008-2013 Toyota Highlander Brake Light Replacment (2008, 2009, 2010, 2011, 2012, 2013)

简介

This is a guide on replacing a brake light on the 2008 Toyota Highlander. Brake lights are an essential part to road safety, and making sure they are in working condition is every drivers duty. Hopefully this guide breaks down the seemingly daunting task with an easy step-by-step replacement anyone can do!

你所需要的

步骤 1 Brake Light

2008-2013 Toyota Highlander Brake Light Replacment, Brake Light: 步骤 1 中的图像 1，3

2008-2013 Toyota Highlander Brake Light Replacment, Brake Light: 步骤 1 中的图像 2，3

2008-2013 Toyota Highlander Brake Light Replacment, Brake Light: 步骤 1 中的图像 3，3

Locate the plastic panel shown in the photo, near the hatch.
Insert a flat head screwdriver in the top indentation.
Pry open and pull out the plastic panel.

翻译

步骤 2

2008-2013 Toyota Highlander Brake Light Replacment: 步骤 2 中的图像 3，3

Grasp the black plastic base of the cable and twist counter-clockwise to unlock the bulb.
Pull the connecting black cable from the entire compartment.
The brake light is at the end of this black cable.

翻译

步骤 3

Hold the black socket bulb holder in one of your hands and pull gently on the light until it pops out.
CAUTION: Too much pressure can break the light bulb.
Put on latex gloves before handling a new bulb.
Grab the new replacement bulb and gently push into the socket.
REMINDER: Use a compatible bulb. For this model we used "LONGLIFE 7443 Sylvania bulbs"

翻译

步骤 4

2008-2013 Toyota Highlander Brake Light Replacment: 步骤 4 中的图像 3，3

Test the replaced bulb by pressing the brakes on your car.
Align the black socket bulb holder with the hole/lock in the taillight compartment.
Twist clockwise until you feel it lock in place