跳转到主内容

2007-2012 Jeep Wrangler Headlight Replacement

你所需要的

  1. 2007-2012 Jeep Wrangler Headlight Replacement, Headlight: 步骤 1 中的图像 1,2 2007-2012 Jeep Wrangler Headlight Replacement, Headlight: 步骤 1 中的图像 2,2
    • Locate the two gray latches on either side of the hood near the headlights.

    • Pull the latches away from the hood to release the latches.

  2. 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 2 中的图像 1,2 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 2 中的图像 2,2
    • Reach under the hood and push the lever left to right. You should now be able to lift the hood.

    • Prop open the hood by inserting the support rod into the designated hole on the underside of the hood.

  3. 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 3 中的图像 1,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 3 中的图像 2,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 3 中的图像 3,3
    • Locate all six push on fasteners on the top of the grill.

    • Use a flathead screwdriver to pry up the fasteners, and make sure you put the screws somewhere safe.

    • If the fasteners will not come up, use two flathead screwdrivers on either side of the fastener to remove.

  4. 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 4 中的图像 1,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 4 中的图像 2,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 4 中的图像 3,3
    • Locate right and left blinker lights under the fenders.

    • Twist blinker light toward the ground, and make sure you pull the bulb out carefully.

    • Make sure you are handling bulb carefully.

  5. 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 5 中的图像 1,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 5 中的图像 2,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 5 中的图像 3,3
    • Make sure all fasteners are removed from top of the grill, and the top of the grill is loose.

    • Firmly pull the bottom of the grill until the grill disconnects from the jeep.

  6. 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 6 中的图像 1,2 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 6 中的图像 2,2
    • Locate the 4 screws holding the headlight in place.

    • Use a star bit screwdriver to unscrew the .164-18 x .625 mm star bit screws around the headlight, and make sure you place screws somewhere safe.

    • Hold the headlight when unscrewing last screw to prevent the headlight from falling.

  7. 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 7 中的图像 1,2 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 7 中的图像 2,2
    • Use your hands to carefully remove silver ring from the headlight.

  8. 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 8 中的图像 1,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 8 中的图像 2,3 2007-2012 Jeep Wrangler Headlight Replacement: 步骤 8 中的图像 3,3
    • Locate red tab on the headlight plug connector, and push it away from the headlight.

    • Firmly pull the connector away from headlight to remove.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Marco Santini

于09/29/15注册

290 声望

撰写一个指南

团队

Cal Poly, Team 17-3, Green Fall 2015 Cal Poly, Team 17-3, Green Fall 2015 的会员

CPSU-GREEN-F15S17G3

4 名成员

创作了3篇指南

3条评论

Could Jeep make it more difficult to do simple maintenance? I doubt it!

Linda Procida - 回复

What is that green connector called? I’m having trouble putting new lights because none of the converters fit.

Alex - 回复

What it is the recommended torque to screw it back?

Luis Vitorio Cargnini - 回复

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 23

过去 30 天: 76

总计 20,383