修复你的物品 社区 商店

2006-2013 Toyota Corolla Ignition Coil Replacement

简介

This is a guide to remove an old ignition coil and install a new one. This is standard maintenance for this vehicle and can be preformed with just a socket wrench with a ten millimeter head.

你所需要的

  1. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: 步骤 1 中的图像 1，3 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: 步骤 1 中的图像 2，3 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: 步骤 1 中的图像 3，3

    • Pop the hood and remove the black plastic cover over the engine.

    • There is nothing to unscrew, or unlatch, and the cover should lift off. Once removed, the top of the engine will look like the third picture

    编辑

  2. 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 2 中的图像 1，2 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 2 中的图像 2，2

    • Unplug the ignition coil you wish to replace. The coils are numbered one though four, left to right.

    • Do not unscrew the bolt on the ignition coil before this step. It makes the electrical plug more difficult to remove

    编辑

  4. 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 3 中的图像 1，1

    • Unscrew the bolt of the coil that needs to be replaced.

    • Be sure to put the bolt in a place you will not lose it!

    编辑

  5. 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 4 中的图像 1，2 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 4 中的图像 2，2

    • Pull the coil straight up and out. It should come off of the spark plug with little resistance.

    编辑

  6. 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 5 中的图像 1，2 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 5 中的图像 2，2

    • Apply a pea-sized amount of grease to the new ignition coil. It should be all around the rubber tip around the bottom.

    • While not required, this step will make any future replacements much easier.

    编辑

  7. 2006-2013 Toyota Corolla Ignition Coil Replacement: 步骤 6 中的图像 1，1

    • When inserting the new ignition coil, press down lightly to ensure it is completely in place.

    • Re-plugging in the ignition coil, and re-screw it in. This can be preformed in either order.

    • Repeat steps three through five as necessary for the other three ignition coils.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Henderson Gillette

于09/23/23注册

133 声望

撰写一个指南

徽章: 3

团队

Austin Community College, Team 22-3, Watkins Fall 2023 Austin Community College, Team 22-3, Watkins Fall 2023 的会员

AUSTINCC-WATKINS-F23S22G3

2 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 13

过去 7 天： 57

过去 30 天： 286

总计 865