2004-2006 Scion xB Hatch Handle Replacement (2004, 2005, 2006)

简介

Hello! Our guide leads you through the steps required to disassemble and replace a broken Scion xB hatch handle. This specific hatch handle has had a history of being prone to breaking and leaves users unable to access their car trunk easily. We will show you how to replace your hatch handles to working order.

你所需要的

步骤 1 Hatch Handle

2004-2006 Scion xB Hatch Handle Replacement, Hatch Handle: 步骤 1 中的图像 1，3

2004-2006 Scion xB Hatch Handle Replacement, Hatch Handle: 步骤 1 中的图像 2，3

2004-2006 Scion xB Hatch Handle Replacement, Hatch Handle: 步骤 1 中的图像 3，3

Open the trunk of the car and locate the 13 clips holding the panel on.

编辑

步骤 2

2004-2006 Scion xB Hatch Handle Replacement: 步骤 2 中的图像 3，3

Push the clip remover under the panel and pry to remove them.
Repeat for all 13 locking caps.

编辑

步骤 3

2004-2006 Scion xB Hatch Handle Replacement: 步骤 3 中的图像 3，3

Use a small flathead screwdriver to depress and release the blue clip.
Grip the connector and pull the cable directly out of its port.

编辑

步骤 4

2004-2006 Scion xB Hatch Handle Replacement: 步骤 4 中的图像 3，3

Use a small flathead screwdriver to depress and release the white clip.
Grip the connector and pull the cable directly out of its port.

编辑

步骤 5

2004-2006 Scion xB Hatch Handle Replacement: 步骤 5 中的图像 3，3

Grab onto the blue cable and twist 90 degrees counter clockwise.
Pull out to detach from holding.

编辑

步骤 6

2004-2006 Scion xB Hatch Handle Replacement: 步骤 6 中的图像 3，3

Grab onto the white cable and twist 90 degrees counter clockwise.
Pull out to detach from holding.

编辑

步骤 7

2004-2006 Scion xB Hatch Handle Replacement: 步骤 7 中的图像 3，3

Grip the nut with pliers.
Rotate the pliers counter clockwise until the nut is removed.

编辑

步骤 8

2004-2006 Scion xB Hatch Handle Replacement: 步骤 8 中的图像 3，3

Repeat the previous step for the other nut.

编辑

步骤 9

2004-2006 Scion xB Hatch Handle Replacement: 步骤 9 中的图像 3，3

Push the rubber seal through the hole to the other side using a plastic tool.
If using a metal tool, take care not to scratch the metal.

编辑

步骤 10

2004-2006 Scion xB Hatch Handle Replacement: 步骤 10 中的图像 3，3

While holding on to the handle assembly, gently pull out the cables to attached to the handle.
Remove the handle assembly.

编辑

步骤 11

2004-2006 Scion xB Hatch Handle Replacement: 步骤 11 中的图像 3，3

Remove the two Phillips screws using a screw gun or a screw driver.

编辑

步骤 12

2004-2006 Scion xB Hatch Handle Replacement: 步骤 12 中的图像 3，3

Use pliers to squeeze the two sides of the plastic clip together.
Use a pry tool to lever the tab out of its socket.
Repeat the previous two bullets on the right side to detach the button.

编辑

步骤 13

2004-2006 Scion xB Hatch Handle Replacement: 步骤 13 中的图像 3，3

Gently clamp the pliers onto the lightbulb socket rubber, to the right of the button.
Rotate the pliers counterclockwise.
Wiggle the lightbulb socket out of its housing.

编辑

步骤 14

Release the right bulb wiring from the channel it sits it.
This may require some force.

编辑

步骤 15

2004-2006 Scion xB Hatch Handle Replacement: 步骤 15 中的图像 3，3

Gently clamp the pliers onto the lightbulb socket rubber, to the left of the button.
Rotate the pliers counterclockwise.
Wiggle the lightbulb socket out of its housing.

编辑

步骤 16

Release the left bulb wiring from the channel it sits it.
This may require some force.

编辑

步骤 17

Remove the button, the lightbulbs, and the wiring from the old hatch handle.

编辑

步骤 18

2004-2006 Scion xB Hatch Handle Replacement: 步骤 18 中的图像 3，3

Use a Phillips head screwdriver to remove the screw on the light cap.

编辑

步骤 19

Remove the lightbulb cap.
Repeat the previous step and then this step with the other cap.

编辑

步骤 20

All the attachments are removed from the old hatch handle, ready to reassemble onto the new hatch handle.
The rest of the guide demonstrates the reassembly procedure.

编辑

步骤 21

2004-2006 Scion xB Hatch Handle Replacement: 步骤 21 中的图像 3，3

Insert the lightbulb cap into place on the right side of the new hatch handle.

编辑

步骤 22

2004-2006 Scion xB Hatch Handle Replacement: 步骤 22 中的图像 3，3

Screw in the Phillips screw with your screw gun.
Repeat the previous step and then this step for the left cap.

编辑

步骤 23

Align the button, the lightbulb, and the wiring attachment.

编辑

步骤 24

2004-2006 Scion xB Hatch Handle Replacement: 步骤 24 中的图像 3，3

Insert the left lightbulb socket to the left of the button.
Use your pliers to gently rotate the lightbulb socket clockwise into place.
Ensure that the lightbulb is fitted into its housing.

编辑

步骤 25

Nest the wiring into the channel to the new hatch handle.
Ensure the wiring is fitted in place.

编辑

步骤 26

2004-2006 Scion xB Hatch Handle Replacement: 步骤 26 中的图像 3，3

Insert the right light bulb into its housing.
Use your pliers to screw the lightbulb clockwise securing it into the new hatch handle.

编辑

步骤 27

Nest the right lightbulb wiring into the channel.

编辑

步骤 28

2004-2006 Scion xB Hatch Handle Replacement: 步骤 28 中的图像 3，3

Lineup both of the tabs on the back of the button with square holes on the handle.
Push it in until the plastic 'U' shaped tabs are all the way through.

编辑

步骤 29

2004-2006 Scion xB Hatch Handle Replacement: 步骤 29 中的图像 3，3

Refasten the two Phillips screws to secure the handle.
The handle assembly is now ready to be reinstalled on the vehicle.

编辑

步骤 30

2004-2006 Scion xB Hatch Handle Replacement: 步骤 30 中的图像 3，3

Thread the wiring through the large hole above the top right corner of the license plate.
Seal the wiring by squeezing it and pushing the front half of the rubber grommet through the hole.

编辑