修复你的物品 社区 商店

1999 - 2003 Acura TL Ignition Coil Replacement

简介

This is a step-by-step guide will show you how to replace the ignition coil of your 1999 - 2003 Acura TL. Though this is a guide to replace a single coil, it is highly recommended that all of the ignition coils are replaced once or the engine may start to misfire. By following this guide you can save yourself an expensive trip to the mechanic.

Before you begin, turn off the car and put it in park. If you have driven recently, wait for the engine to cool before starting the repair.

你所需要的

  1. 1999 - 2003 Acura TL Ignition Coil Replacement, Ignition Coil: 步骤 1 中的图像 1，2 1999 - 2003 Acura TL Ignition Coil Replacement, Ignition Coil: 步骤 1 中的图像 2，2

    • Open the driver side door of car.

    编辑

  2. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 2 中的图像 1，2 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 2 中的图像 2，2

    • Pull the hood latch below the steering wheel and near the door frame towards you to pop open the hood.

    编辑

  3. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 3 中的图像 1，2 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 3 中的图像 2，2

    • Lift the hood slightly to where your fingers can fit under the hood.

    • Reach your fingers under the hood to find the latch that is slightly right off the center.

    • Pull and hold the latch up while simultaneously lifting the hood all the way up until it stays stationary.

    • Be careful that the hood is lifted properly to avoid an accident.

    编辑

  4. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 4 中的图像 1，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 4 中的图像 2，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 4 中的图像 3，3

    • Use a flathead screwdriver to remove one screw from each corner of the cover.

    编辑

  6. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 5 中的图像 1，1

    • Pull the engine cover towards you to remove it.

    编辑

  7. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 6 中的图像 1，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 6 中的图像 2，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 6 中的图像 3，3

    • Pinch the socket, attached to engine coil, and pull up to release.

    • With an Allen key, loosen the screw holding the coil by turning counterclockwise.

    • Make sure to avoid exposed wires.

    编辑

  8. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 7 中的图像 1，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 7 中的图像 2，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 7 中的图像 3，3

    • Pull out the old coil.

    • Avoid exposed wires.

    编辑

  9. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 8 中的图像 1，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 8 中的图像 2，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 8 中的图像 3，3

    • Insert the new coil.

    编辑

  10. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 9 中的图像 1，2 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 9 中的图像 2，2

    • Attach the wire socket to the new coil until you hear a "click," indicating that it is properly inserted.

    编辑

  11. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 10 中的图像 1，1

    • With an Allen key, tighten the screw into the new coil turning clockwise to secure into place.

    编辑

  12. 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 11 中的图像 1，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 11 中的图像 2，3 1999 - 2003 Acura TL Ignition Coil Replacement: 步骤 11 中的图像 3，3

    • Reattach the engine cover and secure the screws with the flathead screwdriver.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 15

总计 134