Use a #2 Phillips screwdriver to remove the four screws.
  • Use a #2 Phillips screwdriver to remove the four screws.

添加评论

Remove the rubber gasket from the rain tray.
  • Remove the rubber gasket from the rain tray.

添加评论

  • Lift the tray upwards and away from the vehicle.

添加评论

  • Use a flathead screwdriver to remove the cap from the windshield wiper.

添加评论

  • Use a socket wrench to release the passenger-side windshield wiper locking nut.

添加评论

  • Gently lift up the passenger-side windshield wiper.

添加评论

  • Remove the driver-side windshield wiper in the same fashion.

添加评论

  • Lift up the plastic cover.

添加评论

  • Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.

  • In a pinch, you can make this tool with a phillips driver bit and end wrench.

添加评论

  • Use a #2 Phillips screwdriver to remove the front two screws.

添加评论

  • Gently unplug and lift out the automatic transmission control unit.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Matthew Newsom

于2010年01月05日注册

31,645 信誉积分

创作了93篇指南

Does the new TCU need to be programmed in any way?? Or is it just plug and play.

Paul Newlove - 回复

does it need to be programmed mine needs replacement my gears are not shifting

dean wafula - 回复

got a question if your display light is dim what could be the problem

dean wafula - 回复

Volkswagen tiguan won't start after disconnection, wat can I do to restart it

Jusu Suapay - 回复

添加评论

浏览统计数据:

过去的24小时: 8

过去的7天: 54

过去的30天: 350

总计 29,360